Changing Boot Sequence for Future Boots

1Enter system setup (see "Entering System Setup" on page 174).

2Use the arrow keys to highlight the Boot Sequence menu option and press <Enter> to access the menu.

NOTE: Write down your current boot sequence in case you want to restore it.

3Press the up- and down-arrow keys to move through the list of devices.

4Press the spacebar to enable or disable a device (enabled devices have a checkmark).

5Press plus (+) or minus (–) to move a selected device up or down the list.

Clearing Forgotten Passwords

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.

1Follow the procedures in "Before You Begin" on page 101.

2Remove the computer cover (see "Removing the Computer Cover" on page 103).

3Locate the 3-pin password connector (PSWD) on the system board.

4Remove the 2-pin jumper plug from pins 2 and 3 and fix it on pins 1 and 2.

180

Appendix

Page 180
Image 180
Dell 200 owner manual Clearing Forgotten Passwords