JVC LYT0596-001A, GR-DVL707 Dubbing Images Recorded On a Tape To The Built-in Memory, EN47

Rotate MENU/BRIGHT to select “1RETURN” and press it twice. The normal playback screen resumes.

To select a video image to be dubbed, start playback by pressing 4/6. At the moment you find the image you wish to dub, press it again to engage Still Playback.

Power Switch

			OFF
		Y
	A
P	L

MODE Button

EN47

Dubbing Images Recorded On A Tape To The Built-in Memory

Images can dubbed from a tape to the camcorder’s built-in memory.

SNAPSHOT Button

MENU/

BRIGHT

Wheel

Lock Button

1 Load a cassette (
pg. 10).

2 Set the VIDEO/DSC Switch to “VIDEO”, then set the

Power Switch to “ ” while pressing down the Lock Button.

3 Press MENU/BRIGHT. The Menu Screen appears. Rotate it to select “ ” and press it. “VIDEO MENU” appears.

4 Rotate MENU/BRIGHT to select “ COPY” and press it. The Sub Menu appears. Rotate it to select “ON” and press it. Selection is complete.

V I DEO MENU 1RE TURN

SOUND MODE

1 2B I T MODE SYNCHRO REC MODE

COPY ON

Play/Pause Button (4/6)

VIDEO/DSC Switch (Open the LCD monitor to access this switch.)

Display

SP 6

5

6

7 Press MODE to select the Snapshot mode to use for dubbing the image to the built-in memory.

8 To start dubbing, press SNAPSHOT. The selected image is stored in the built-in memory.

•“” blinks during dubbing.

NOTES:

●If SNAPSHOT is pressed in step 8 when the built-in memory is full, the message “COPYING FAILED” appears.

●If an image recorded on the tape using the WIDE mode (
pg. 24) is dubbed to the camcorder’s built-in memory, the WIDE mode identifying signal is not dubbed with it.

●To use Playback Special Effects with a video image you

wish to dub, perform up to step 8 using the remote control (provided) (
pg. 51).