To install the OKI LPR utility

The OKI LPR utility requires that the TCP/IP protocol should be installed into your Windows system. To install the TCP/IP protocol into your Windows system consult your Windows manual.

Windows XP/2000/NT4.0 requires administrator privileges.

1.Set up the printer driver by designating the output destination to [Local Printer (LPT1:)]. For information on setting up your printer driver, see the printer user manual.

2.Insert the Network Software CD-ROM inyp the CD-ROM drive. The Setup Utility starts automatically. If it does not start, double-click setup.exe on the CD-ROM.

3.Select [Software Utilities].

4.Select [Install OkiLPR].

5.Follow the on-screen instructions.

6.Click [Next] when the [Welcome] screen is displayed.

7.Verify [Destination Folder] and [Spool Folder] and click [Next].

8.Check [Register in Startup] if you want automatic startup as Windows boots up. Check [Launch as minimized] if you want to startup in the Icon state and click [Next].

9.Verify the program folder name and click [Next]. The installation starts.

10.When the installation ends, the [Setup complete] screen is displayed. Check [Yes, I want to launch OKI LPR Utility now] and click [Finish]. Check [Yes, I want to view the ReadMe File] if you want to read [Readme]. The OKILPR utility starts.

11.Select [Add Printer] on the [Remote Print] menu.

Configuration 81

Page 82
Image 82
Oki 7300e manual To install the OKI LPR utility, Windows XP/2000/NT4.0 requires administrator privileges