SNMP Tab
This allows you to configure SNMP related items.
Location | Comments |
|
|
Authentic | This community name is used to check whether incoming SNMP |
Community | requests have the correct community name or not. The community |
| name is displayed as ****** for security reasons. |
|
|
TRAP Community | This community name is assigned to outgoing system traps such as |
| cold start, authentication failure, etc. |
|
|
TRAP Address | Set a destination IP address of a Trap packet. If 0.0.0.0 is set, the Trap |
| is disabled. |
|
|
SysContact | Set SysContact (printer manager) name. |
|
|
SysName | Set SysName (printer model name). |
|
|
SysLocation | Set SysLocation (the location where the printer is installed). |
|
|
Default TTL | Set TTL (Time To Live) value. |
|
|
Enable Authentic | Set Authentic Trap to enabled/disabled. |
Trap |
|
|
|
