>The Ethernet Address (MAC address) is displayed during the
3.AdminManager asks whether you want to initialise the network interface card or not. Select [Yes]. Even if you select [No] here, the IP address that you set can be used after turning the printer OFF and ON. The requirement to turn your printer OFF and ON is dependent on the network interface card.
Option Menu
In the [Option] menu, the following item can be selected:
Item | Function |
|
|
|
|
Use TCP/IP Protocol | If this item is selected, AdminManager uses TCP/IP protocol to | |
| search/configure network interface cards. | |
|
| |
Use IPX/SPX | If this item is selected, AdminManager uses IPX/SPX protocol to | |
Protocol | search/configure network interface cards. | |
|
|
|
Environment Setup | TCP/IP Tab | Set broadcast addresses that are used to |
|
| search OKI network interface cards using the |
|
| TCP/IP protocol. If [Use TCP/IP protocol] is |
|
| unchecked, the search will not be carried out |
|
| using TCP/IP. |
|
|
|
| NetWare Tab | Set network addresses that are used to |
|
| search OKI network interface cards via |
|
| NetWare protocol. If there any many NetWare |
|
| file servers on your network, specify the |
|
| network address to which the network card |
|
| belongs. If [Use NetWare protocol] is |
|
| unchecked, the search will not be carried out |
|
| using NetWare, but if [Auto Search] is |
|
| selected, AdminManager will search all |
|
| networks that AdminManager can detect. |
|
|
|
| TimeOut Tab | [Search Every]: Set response waiting time |
|
| from a network card in seconds. |
|
| [Time Out]: Set time out between |
|
| AdminManager and the network interface |
|
| card in seconds. |
|
| [Retry]: Set how many times the retry will be |
|
| carried out between AdminManager and the |
|
| network interface card. |
|
|
|
