Configuration
There are three items that need to be configured for EtherTalk.
1.Use EtherTalk Protocol
Please check the Use EtherTalk Protocol checkbox.
2.Printer Name
Give the Printer Name as you would like it to appear in the Chooser
3.Zone Name
If your network uses Zones, please enter the Zone Name here, otherwise leave as is.
AppleTalk Configuration
To enable network printing from the Macintosh, you must configure AppleTalk to connect via Ethernet.
1.From the Apple menu select [Control Panels – AppleTalk].
2.From the AppleTalk configuration page select [Connect via: Ethernet].
3.In Setup Current Zone, if used, make sure that your zone information is correct.
Apple Macintosh 131
