a. Stop the printer spooler.
# /usr/sbin/lpshut
b.Add the following line to the /etc/inetd.conf file and register the remote spooler.
printer stream tcp nowait root /usr/sbin/ rlpdameon
c. Restart inetd
#/etc/inetd –c
6.Register the remote printer
Example: setting up a queue called C7400_lp to print to host C7400 d. Register the remote printer.
#/usr/sbin/lpadmin
e. Activate the print queue.
# /usr/sbin/accept C7200_lp
f. Enable the print queue.
# /bin/enable C7200_lp
g. Enable the printer spooler.
# /usr/sbin/lpsched
To customise output, for example, to add additional commands at the start of each print job, you can edit a copy of the /usr/spool/lp/model/ rmodel model file then add it using the lpadmin command.
Example: for printer C7400_lp, with model file called C7400_model
#/usr/sbin/lpshut
#/usr/sbin/lpadmin
#/usr/sbin/lpsched