7.The [Welcome to the Add Standard TCP/IP Printer Port Wizard] will appear.
8.Select [Next] and provide the following information. Enter [Printer name or IP address], for example: 192.168.1.31. If the above IP address is entered, the Port Name will default to IP_192.168.1.31.
9.Select [Next]. [Additional Port Information Required] displayed.
10.Under [Device Type], select [Custom] then [Settings].
11.Ensure [Protocol] is set to [LPR].
12.Ensure [Queue Name] is "lp" and [SNMP Status Enabled] is deselected.
13.Select [OK].
14.Follow on screen instructions to finish installing the printer.
Port 9100
1.Select [Start], [Settings], [Control Panel]. and [Printers and Other Hardware].
2.Select [Printers and Faxes].
3.Click [Add Printer] and then select [Next].
4.Select [Local printer attached to this computer], clear the [Automatically detect and install my Plug and Play printer] check box, and then select [Next].
5.Select [Create a New Port] and select [Type Standard TCP/IP Port].
6.Select [Next].
7.The [Welcome to the Add Standard TCP/IP Printer Port Wizard] will appear.
Microsoft Windows 95
