5.Enter [root] in User name and your password (default is the last six digits of the Ethernet address) in Password and click [OK].

For example: For Ethernet address 00:80:92:01:00:D2, a default password is [0100D2]. The Ethernet address (MAC address) is displayed during the self-diagnostic test.

6.After the new values are transmitted to the network card, the following screen is displayed. If a different message is displayed, check the settings.

The root password can be changed to allow you to configure the OkiLAN 7300e and printer by using a Web browser. The default password is the last six digits of the MAC address.

To change the root password for configuration via a Web browser, access [http://OKILAN 7300e IP address or hostname>/ system_password.htm]. After inputting the current root password, this screen is displayed:

Input a new root password in [New Admin Password] and [Confirm New Admin Password] then select [Submit] button. If your request is successfully processed, the following screen is displayed:

The root password for configuration via Web browser is different for AdminManager/TELNET/FTP. These passwords can be set in AdminManager or TELNET.

Configuration 51

Page 52
Image 52
Oki 7300e manual Configuration