Printing the Network Interface Card Configuration Sheet

The printer’s configuration page reports information that is required for NetWare configuration. To print a configuration page, while the printer is switched on, depress the NIC’s push-button for three seconds and then release.

The information that you require is the printer’s Ethernet address. It is displayed at the top of the first page under the title Diagnostic report, and is displayed in bold below.

*** Diagnostic report ***

ROM Check:Okstat:F05B FFFF 0000 0000

RAM Check:Okstat:0000 0000 0000 0000

NIC Check: Ok Addr:*00:80:92:07:DB:85 100BASE-TX

The first six digits of the Ethernet address are the same for all OkiLan7300e network cards. The last six digits of the Ethernet address are unique to each card

This is all the information that is required to setup the OkiLan7300e for NetWare.

Setup Utilities

Use NWAdmin32 or the Pconsole utility to create and setup NetWare printer objects. Please refer to Novell documentation for instructions on how to achieve this.

Use the OKI Network Card Setup Utility (AdminManager) or other printer manager software, (Web browser, JetAdmin, etc.) to configure

Novell NetWare 104

Page 105
Image 105
Oki 7300e manual Setup Utilities, Printing the Network Interface Card Configuration Sheet