Oki 7300e manual Public

Ref. No.	Admin	Web browser	TELNET/	Available	Notes
	Manager		Diagnostic test	options
			print
SNMP-1	[OKI Device	[Network	[Setup SNMP]-	Any	This
	Setup]-	Configuration]-	[Authentic	alphanumeric	community
	[SNMP]-	[SNMP Traps]-	community]	characters up to	name is used
	[Authentic	[MIB-II Information]-		15 characters.	to check
	Community]	[Authentic		(Default is	whether
		Community]		[public])	incoming
					SNMP
					requests have
					the correct
					community
					name or not.
					The
					community
					name is
					displayed as
					****** for
					security
					reasons
SNMP-2	[OKI Device	[Network	[Setup SNMP]-	Any	This
	Setup]-	Configuration]-	[Trap community]	alphanumeric	community
	[SNMP]-[TRAP	[SNMP Traps]-		characters up to	name is
	Community]	[MIB-II Information]-		15 characters.	assigned to
		[Trap Community]		(Default is	outgoing
				[public])	system traps
					such as cold
					start,
					authenti-
					cation failure,
					etc.
SNMP-3	[OKI Device	[Network	[Setup SNMP]-	0.0.0.0—	Set a
	Setup]-	Configuration]-	[Trap address]	255.255.255.2	destination IP
	[SNMP]-	[SNMP Traps]-		55 (0.0.0.0)	address of
	[TRAP	[MIB-II Information]-			Trap packet. If
	Address]	[Trap IP Address]			0.0.0.0 is set,
					Trap is
					disabled
SNMP-4	[OKI Device	[Network	[Setup SNMP]-	Any	Set
	Setup]-	Configuration]-	[SysContact]	alphanumeric	SysContact
	[SNMP]-	[General Settings]-		characters up to	(printer
	[SysContact]	[System		255 characters.	manager)
		Information]-		(Default is null)	name
		[System Contact]
SNMP-5	[OKI Device	[Network	[Setup SNMP]-	Any	Set SysName
	Setup]-	Configuration]-	[SysName]	alphanumeric	(printer model
	[SNMP]-	[General Settings]-		characters up to	name)
	[SysName]	[System		255 characters.
		Information]-		(Default is null)
		[System Name]
SNMP-6	[OKI Device	[Network	[Setup SNMP]-	Any	Set Sys-
	Setup]-	Configuration]-	[SysLocation]	alphanumeric	Location (the
	[SNMP]-	[General Settings]-		characters up to	location
	[SysLocation]	[System		255 characters.	where the
		Information]-		(Default is null)	printer is
		[System Location]			installed)

Configuration 60