6.In the [Select Network Protocol] dialogue box, select [Internet Protocol (TCP/IP)] then click [OK].

7.The Windows XP installation CD-ROM may be required. Follow the remaining dialogue box prompts.

Once the protocol has been installed and configured in Windows, the next step is to configure the TCP/IP parameters in the network printer.

Network printer IP address configuration

Use the Standard Set-up Utility to configure the IP Address, Subnet Mask and Gateway.

1.Connect the printer to the network and turn on.

2.Place the Network Software Utilities disk in the CD-ROM drive. The set-up utility starts automatically. If the set-up utility does not start, double-click on setup.exe in the Windows folder of the CD-ROM.

3.Select [Network Card Set-up].

4.Select [Network Card Quick Set-up].

5.Select the appropriate language.

6.Click [Next] at Welcome screen.

7.If you agree to the User License Agreement, click [Next].

8.Select the appropriate network card, using the Ethernet address to identify it, and click [Next].

The Ethernet address of the printer can be found on the self- diagnostic printout, which can be printed by pressing the push-button on the network card for two seconds and then releasing it.

Microsoft Windows 87

Page 88
Image 88
Oki 7300e manual Network printer IP address configuration