TCP/IP Tab
This allows you to configure TCP/IP related items.
Location | Comments |
|
|
Use TCP/IP Protocol | Set TCP/IP protocol as enabled/disabled. |
|
|
Use DHCP/BOOTP | Check this item if IP address, subnet mask, default gateway and |
| IP addresses for DNS primary server and secondary servers are |
| retrieved from the DHCP or BOOTP server. Otherwise, uncheck. |
|
|
Use RARP | Check this item if IP address is retrieved from the RARP server. |
| Otherwise, uncheck. |
|
|
IP Address | Set the IP address of the selected network interface card. |
|
|
Subnet Mask | Set the subnet mask of the selected network interface card. |
|
|
Default Gateway | Set the default gateway of the selected network interface card. |
|
|
Use FTP/LPD Banner | Check this item if you want to add the FTP/LPD banner. Otherwise, |
| uncheck. |
|
|
DNS Server . . . | Set IP addresses for DNS primary and secondary servers. |
|
|
To find corresponding items in WEB and TELNET, see the equivalent in the Configurable Items and Default Values table that starts on page 59.
Configuration 23
