Star Trac 7000, 5700, 6800, 6900 manual Install the Bottle Holders Pro Only, NXT Pro/Elite Step

Page 12

5. Install the Handlebar

NXT Only

Positioning the handlebar post with the number 1 on top and insert the handlebar into the handlebar sleeve locking it at number 4.

Slide the handlebar onto the handlebar post insert with the water bottle holders facing forward and align the three screw holes.

Insert the socket head set screw into the handlebar but do not tighten at this time.

Insert the 2 flat head screws into the handlebar but do not tighten at this time.

Check for proper alignment then tighten the 2 flat head screws using a 5mm hex wrench to 60 inch pounds.

Tighten the set screw to 60 inch pounds using a 4mm hex wrench.

Slide the handlebar post into the frame making sure the holes face the front of the bike.

Allow the post to go into the frame all the way in to level 1 and align the pop pin so it snaps into the hole then tighten the pop pin and test for steadiness.

Loosen the pop pin and raise the handlebar to its highest position number 10 and tighten the pop pin and test for steadiness.

Pro & Elite Only

Slide the handlebar post into the frame making sure the holes face the front of the bike.

Allow the post to go into the frame all the way in to level 1 and align the pop pin so it snaps into the hole then tighten the pop pin and test for steadiness.

Loosen the pop pin and raise the handlebar to its highest position and tighten the pop pin and test for steadiness.

6.Install the Bottle Holders (Pro Only)

Using the 3mm Allen Wrench, remove the two screws from the right side fork of the frame assembly. Position a water bottle holder in place against the frame assembly, and re-install the two screws to secure.

Repeat to install the cross member water bottle holder.

Step 5 (NXT)

Step 5 (Pro/Elite)

Step 6

Page 12

STAR TRAC GROUP CYCLES OWNER’S GUIDE

Page 11 Page 13
Image 12
Page 11 Page 13
Contents BikeSpinner Spinner Pro Spinner Elite Spinner NXT Star Trac Group Cycles OWNER’S Guide Introduction Fitness Safeguards Operating PrecautionsSafety Instructions Bikespinner Assembly and Setup Assembly and SetupBike Parts List Description Qty Assembly StepInstall the Handlebar Install the Water Bottle HoldersSpinner PRO / Elite / NXT Assembly and Setup NXT Parts List not shown Description QtyPro/Elite Parts List Pro shown above Description Qty Star Trac Group Cycles OWNER’S Guide Install the Front Leg NXTPro/Elite NXT OnlyInstall the Saddle and Seat Slider Pro/Elite NXTInstall the Bottle Holders Pro Only NXT Pro/Elite StepTesting the Bike Use this checklist to perform the bike test procedureSeat Adjustments Instructions for USEBike Spinner Spinner NXTHandlebar Adjustments Pedal Strap AdjustmentResistance Control Smart Release SystemBefore Beginning WARM-UPWork OUT COOL-DOWNPreventive Maintenance MaintenanceTool Purpose Inspection Parts Replacement Moving and LevelingTo move the cycle to a new location To level the cycleChain tension adjustment Chain Replacement Page Star Trac

6900, 5700, 6800, 7000 specifications

Star Trac is renowned in the fitness industry for producing high-quality commercial cardio equipment, and their various treadmill models, such as the 7000, 6800, 5700, and 6900 series, showcase the brand's commitment to innovation and performance.

The Star Trac 7000 treadmill is designed for high-performance facilities, featuring a powerful 4.0 HP motor that supports a maximum speed of 15 miles per hour. It utilizes Star Trac's advanced deck cushioning system, which reduces impact on joints, and has an inclined range of 0 to 15%, allowing users to diversify their workouts. The large, interactive touchscreen console provides customizable workout programs, heart rate monitoring, and entertainment options, enhancing user engagement and motivation.

Meanwhile, the Star Trac 6800 treadmill stands out with its user-friendly design and robust construction. Equipped with a 3.0 HP motor, this model supports a speed range of up to 12 miles per hour and includes adjustable incline settings. Its intuitive console provides access to a variety of workout programs, and the integrated heart rate sensors ensure users can monitor their cardiovascular performance. The 6800's spacious running surface, combined with a cushioned deck, makes it ideal for users of various fitness levels.

The Star Trac 5700 treadmill caters to those seeking a balance between performance and value. Featuring a 2.5 HP motor, the 5700 offers a top speed of 12 miles per hour and a 15% incline, making it suitable for both casual users and serious athletes. The console offers essential metrics such as time, distance, speed, and calories burned, while heart rate monitoring is available through contact sensors. Its compact footprint makes it an excellent choice for facilities with limited space.

Finally, the Star Trac 6900 treadmill combines advanced technology with an ergonomic design. With a powerful 3.5 HP motor, this model reaches up to 12 miles per hour and features an incline range of 0 to 15%. The 6900 boasts a large console with integrated Bluetooth technology, allowing users to connect to their personal devices, access fitness apps, and share performance data. The enhanced cushioning system further reduces impact, promoting longer workout sessions with minimized discomfort.

In summary, the Star Trac 7000, 6800, 5700, and 6900 treadmills offer unique features tailored to meet the diverse needs of fitness enthusiasts. These models incorporate cutting-edge technology, effective cushioning, and user-friendly consoles that enhance the workout experience, solidifying Star Trac's reputation in the commercial fitness market.
Top Page Image Contents