Inter-Tel PATL41106.0 user manual

Page 8

5.Place the treadmill in the storage position (see HOW TO FOLD AND MOVE THE TREADMILL on page 24).

Set the cylinder end of the Gas Spring (92) near the bracket on the base of the Uprights (84).

See the two small inset drawings. Using your fingernail or the end of a screwdriver, press on the end of the Spring Pin (25), pivot it, and pull it out of the Gas Spring

(92). Be careful to avoid losing the Spring Pin. Note: Extra Spring Pins are included.

See drawing 5a. Press the cylinder end of the Gas Spring (92) onto the ball on the bracket. Next, insert the end of the Spring Pin (25) into two of the small holes in the end of the Gas Spring. Then, pivot the Spring Pin until it clips onto the Gas Spring.

6.Raise the free end of the Gas Spring (92) to a vertical position. Remove the Spring Pin (25) from the free end of the Gas Spring as described in step 5. If necessary, ro- tate the Gas Spring to align the end of the Gas Spring with the ball on the bracket on the Frame (58).

Plug in the power cord as described on page 10. Turn on the power as described on page 12. Next, press the Incline increase and decrease buttons until the ball on the bracket is aligned with end of the Gas Spring (92). Then, press the end of the Gas Spring onto the ball. Note: It may be necessary to press the end of the Gas Spring onto the ball while the Frame (58) is moving.

See drawing 6a. Insert the Spring Pin (25) into the two indicated small holes in the end of the Gas Spring (92). Then, pivot the Spring Pin until it clips onto the Gas Spring.

Press the Incline decrease button until the treadmill is at the lowest incline level. Then, unplug the power cord.

5

 

 

 

25

 

 

 

 

 

 

84

 

 

 

 

25

 

 

 

92

Bracket

 

 

 

 

25

 

 

 

 

 

 

 

Cylinder

 

5a

 

 

 

 

 

 

25

 

 

 

92

 

Bracket

 

 

 

 

 

6

 

 

58

 

 

 

 

 

 

 

 

Bracket

 

 

 

 

25

 

 

 

 

92

 

6a

 

 

 

 

 

 

Holes

 

 

 

 

 

92

 

 

 

25

 

 

7.Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of clear plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the tread- mill. Note: Extra hardware may be included. Keep the included hex key in a secure place; the hex key is used to adjust the walking belt (see page 27).

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Model No. PATL41106.0 Serial No Please Contact OUR CUS- Tomer Service Department DirectlyQUESTIONS? Table of Contents Important Precautions Page Before YOU Begin Back Right SideAssembly Make sure that the power cord is unpluggedPage Page HOW to USE the Chest Pulse Sensor HOW to PUT on the Chest Pulse SensorChest Pulse Sensor Care and Maintenance Chest Pulse Sensor TroubleshootingPRE-LUBRICATED Walking Belt Operation and AdjustmentHOW to Plug in the Power Cord Features of the Console HOW to Turn on the Power HOW to USE the Manual ModeMeasure your heart rate if desired Turn on the fan if desiredHOW to USE a Preset Program Select one of the preset programsFollow your progress with the matrix Display HOW to USE a Pulse Program Follow your progress with the matrix Display HOW to Connect the Treadmill to USE Ifit Programs HOW to Connect Your MP3 Player or CD PlayerHOW to Connect Your Portable Stereo Audio CableHOW to Connect Your Home Stereo HOW to Connect Your ComputerHOW to Connect Your VCR HOW to USE AN Ifit MP3, CD, or Video ProgramSelect the iFIT mode Press the Play button on your MP3 player, CD Player, or VCRMeasure your heart rate if desired Return to the treadmill and stand on the foot HOW to USE AN Ifit Program Directly from OUR WEB SiteFollow the on-line instructions to start Program Information Mode Important If aHOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Fold the Treadmill for Storage HOW to Lower the Treadmill for USE Troubleshooting Problem The power turns off during useProblem The walking belt slows when walked on Top Problem The chest pulse sensor does not function properly Conditioning Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencySuggested Stretches R0906A Key Qty DescriptionExploded Drawing a Exploded Drawing B-Model No. PATL41106.0 R0906A Exploded Drawing C-Model No. PATL41106.0 R0906A Exploded Drawing D-Model No. PATL41106.0 R0906A Goodfamily, Inc Ordering Replacement PartsLimited Warranty

PATL41106.0 specifications

The Inter-Tel PATL41106.0 is a versatile and robust communication device that serves as an essential component in modern telephony systems. Part of Inter-Tel’s family of telecommunications solutions, this device is designed to enhance both functionality and user experience in business environments.

One of the main features of the PATL41106.0 is its compatibility with advanced VoIP (Voice over Internet Protocol) technologies. This allows users to make voice calls over the internet, which significantly reduces communication costs, particularly for long-distance calls. Its support for SIP (Session Initiation Protocol) enables seamless integration with various IP-based communications systems, providing businesses with flexibility in their communications infrastructure.

The device is equipped with multiple lines, allowing users to handle several calls simultaneously. This is particularly advantageous for busy office environments where efficient call management is crucial. The PATL41106.0 also includes programmable keys that can be customized for quick access to frequently dialed numbers or specific features, improving workflow and productivity.

Another characteristic of the Inter-Tel PATL41106.0 is its user-friendly interface. The device features an intuitive display that provides essential information such as caller ID, call status, and menu navigation options. This ensures that users can easily access and manage their calls without getting bogged down by complicated procedures.

Moreover, the PATL41106.0 supports a variety of audio codecs, enhancing call quality even in environments with limited bandwidth. This adaptability makes it a reliable choice for businesses that require consistent communication regardless of their internet conditions.

In terms of installation and maintenance, the device is designed for straightforward integration with existing telecommunications systems. Its compact design and robust build ensure longevity and ease of placement in various office settings.

Finally, the Inter-Tel PATL41106.0 is equipped with advanced security features to protect against unauthorized access and to ensure the integrity of communications. This focus on security is crucial in today’s business landscape, where data protection is of utmost importance.

Overall, the Inter-Tel PATL41106.0 offers a compelling suite of features and technologies, making it a practical choice for businesses looking to enhance their telecommunications capabilities. With its blend of functionality, adaptability, and user-friendly design, this device is an integral part of any modern communication strategy.
Top Page Image Contents