HOW to USE the Chest Pulse Sensor

HOW TO PUT ON THE CHEST PULSE SENSOR

The chest pulse sensor consists of two components: the chest strap and the sensor unit (see the drawing below). Insert the tab on one end of the chest strap into the hole in one end of the sensor unit, as shown in the inset drawing. Press the end of the sensor unit under the buckle on the chest strap. The tab should be flush with the front of the sensor unit.

	Chest Strap
Tabs
	Tab
Sensor Unit	Sensor	Buckle
	Unit	Buckle
	Unit

Next, wrap the chest

pulse sensor around your chest and attach the other end of the chest strap to the

sensor unit. Adjust the length of the chest strap, if neces-

sary. The chest pulse

sensor should be under your clothes, tight against your skin, and as high under the pectoral muscles or breasts as is comfortable. Make sure that the logo on the sensor unit is facing forward and is right-side-up.

Next, pull the sensor unit away from your body a few inches and locate the two electrode areas on the inner side (the electrode areas are covered by shallow ridges). Using saline solution such as saliva or contact lens solution, wet both electrode areas. Return the sensor unit to a position against your chest.

CHEST PULSE SENSOR CARE AND MAINTENANCE

•Thoroughly dry the chest pulse sensor after each use. The chest pulse sensor is activated when the electrode areas are wetted and the heart rate monitor is put on; the chest pulse sensor shuts off when it is removed and the electrode areas are dried. If the chest pulse sensor is not dried after each use, it may remain activated longer than nec- essary, draining the battery prematurely.

•Store the chest pulse sensor in a warm, dry place. Do not store the chest pulse sensor in a plastic bag or other container that may trap moisture.

•Do not expose the chest pulse sensor to direct sun- light for extended periods of time; do not expose it to temperatures above 50° C (120° F) or below -10° C (15° F).

•Do not excessively bend or stretch the sensor unit when using or storing the chest pulse sensor.

•Clean the sensor unit using a damp cloth—never use alcohol, abrasives, or chemicals. The chest strap may be hand washed and air dried.

CHEST PULSE SENSOR TROUBLESHOOTING

The instructions on the following pages explain how the chest pulse sensor is used with the con- sole. If the chest pulse sensor does not function properly, try the steps below.

•Make sure that you are wearing the chest pulse sen- sor as described at the left. Note: If the chest pulse sensor does not function when positioned as de- scribed, move it slightly lower or higher on your chest.

•Use saline solution such as saliva or contact lens solution to wet the two electrode areas on the sensor unit. If heart rate readings do not appear until you begin perspiring, rewet the electrode areas.

•As you walk or run on the treadmill, position your- self near the centre of the walking belt. For the con- sole to display heart rate readings, the user must be within arm’s length of the console.

•The chest pulse sensor is designed to work with people who have normal heart rhythms. Heart rate reading problems may be caused by medical condi- tions such as premature ventricular contractions (pvcs), tachycardia bursts, and arrhythmia.

•The operation of the chest pulse sensor can be af- fected by magnetic interference caused by high power lines or other sources. If it is suspected that this is a problem, try relocating the treadmill.

•The CR2032 battery may need to be replaced (see page 28).

PATL41106.0 specifications

The Inter-Tel PATL41106.0 is a versatile and robust communication device that serves as an essential component in modern telephony systems. Part of Inter-Tel’s family of telecommunications solutions, this device is designed to enhance both functionality and user experience in business environments.

One of the main features of the PATL41106.0 is its compatibility with advanced VoIP (Voice over Internet Protocol) technologies. This allows users to make voice calls over the internet, which significantly reduces communication costs, particularly for long-distance calls. Its support for SIP (Session Initiation Protocol) enables seamless integration with various IP-based communications systems, providing businesses with flexibility in their communications infrastructure.

The device is equipped with multiple lines, allowing users to handle several calls simultaneously. This is particularly advantageous for busy office environments where efficient call management is crucial. The PATL41106.0 also includes programmable keys that can be customized for quick access to frequently dialed numbers or specific features, improving workflow and productivity.

Another characteristic of the Inter-Tel PATL41106.0 is its user-friendly interface. The device features an intuitive display that provides essential information such as caller ID, call status, and menu navigation options. This ensures that users can easily access and manage their calls without getting bogged down by complicated procedures.

Moreover, the PATL41106.0 supports a variety of audio codecs, enhancing call quality even in environments with limited bandwidth. This adaptability makes it a reliable choice for businesses that require consistent communication regardless of their internet conditions.

In terms of installation and maintenance, the device is designed for straightforward integration with existing telecommunications systems. Its compact design and robust build ensure longevity and ease of placement in various office settings.

Finally, the Inter-Tel PATL41106.0 is equipped with advanced security features to protect against unauthorized access and to ensure the integrity of communications. This focus on security is crucial in today’s business landscape, where data protection is of utmost importance.

Overall, the Inter-Tel PATL41106.0 offers a compelling suite of features and technologies, making it a practical choice for businesses looking to enhance their telecommunications capabilities. With its blend of functionality, adaptability, and user-friendly design, this device is an integral part of any modern communication strategy.