Assembly
The Keys 5600T Treadmill will require assembly before operating. After opening the box, remove any packing material from the treadmill.
Do not throw away any packing materials until the unit is working properly.
Place the base on a clean, level surface. Make sure the electrical cord will easily reach an elec- trical outlet.
Locate the hardware pack and identify the following parts required for assembly.
Parts List:
1. | Owner’s Manual |
|
|
8. | Left and Right Junction Box | ||
2. | Base Assembly | 9. | Phillips Screw M6x12 (Qty 2) |
3. | Console Assembly | 10. | Allen Bolt M8x15 (Qty 12) |
4. | Left and Right Upright | 11. | Washer 9x22x2 (Qty 12) |
5. | Left and Right Fender | 12. | Allen Wrench |
6. | Safety Key (Reed Switch) | 13. | Chest Strap |
7. | Console Assembly | 14. | Phillips Screw ST1.2x13 |
|
|
|
|
Base
Left Upright
Console
Right Upright
Safety Key
Manual
Allen Wrench
Left Fender | Right Fender |
| Left Junction Box |
Philip Screw M6*12 | Right Junction Box | |
2 pcs |
|
|
Allen Bolt M8*15 | Washer 9*22*2 | |
Philip Screw ST4.2*13 | 12 pcs | 12 pcs |
6 pcs
5