Assembly
Figure 3
Step 1
Connect the Console Harness coming from Left Upright to Cable Harness coming from Motor Cover.
Step 2
Attach Left Upright and Right Upright to Base using Allen Bolts M8x15 (Qty. 8) and Washer 9x22x2 mm (Qty. 8).
Do not tighten bolts.
Figure 3 |
|
| Right Upright |
Left Upright |
|
Left Fender | Right Fender |
| Washer 9*22*2 |
| Allen Bolt |
| M8*15 |
Figure 4
Step 1
Attach Console to Left and Right Uprights using Washers (Qty. 4) and Allen Bolts (Qty. 4).
Figure 4
Console
Washer 9*22*2
Allen Bolt M8*15
Left Upright | Right Upright |
7