HOW to Fold and Move the Treadmill

HOW TO FOLD THE TREADMILL FOR STORAGE

Before folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be permanently damaged. Next, unplug the power cord. CAUTION: You must be able to safely lift 45 pounds (20 kg) to raise, lower, or move the treadmill.

1.Hold the treadmill in the locations shown at the right. To decrease the possibility of injury, bend your legs and keep your back straight. As you raise the treadmill, make sure to lift with your legs rather than your back. Raise the treadmill about halfway to the vertical position.

2.Hold the treadmill frame firmly with your left hand. Using your right hand, pull the latch knob to the right and hold it. Raise the treadmill until the pin on the latch knob is aligned with the hole in the left handgrip. Then, release the latch knob. Make sure that the latch knob is fully released so that the pin is fully inserted into the hole in the left handgrip.

To protect the floor or carpet from damage, place a mat under the treadmill. Keep the treadmill out of direct sunlight. Do not leave the treadmill in the stor- age position in temperatures above 85° Fahrenheit.

HOW TO MOVE THE TREADMILL

Before moving the treadmill, convert the treadmill to the storage position as described above. Make sure that the pin on the latch knob is fully inserted into the hole in the left handgrip.

1.Hold the handgrips and place one foot against one of the wheels.

2.Tilt the treadmill back until it rolls freely on the wheels. Carefully move the treadmill to the desired location. To re- duce the risk of injury, use extreme caution while moving the treadmill. Do not attempt to move the treadmill over an uneven surface.

3.Place one foot against a wheel, and carefully lower the treadmill until the base is resting in the storage position.

HOW TO LOWER THE TREADMILL FOR USE

2
Frame	Latch
	Latch
Latch	Knob
Latch	Pin
Knob
Handgrip
Pin	Handgrip
Pin
	Base
	Front Wheels

1.See drawing 2 above. Hold the upper end of the treadmill with your right hand. Pull the latch knob to the left and hold it. Pivot the treadmill down until the frame is past the latch pin.

2.See drawing 1 above. Hold the treadmill firmly with both hands, and lower the treadmill to the floor.

CAUTION: To decrease the possibility of injury, bend your legs and keep your back straight.

IMTL11905.0 specifications

Image IMTL11905.0 is a state-of-the-art technological advancement in the field of imaging and visual representation. Designed with precision and engineered for excellence, this image exemplifies the perfect amalgamation of innovative features and cutting-edge technologies that define modern imaging solutions.

One of the main features of IMTL11905.0 is its exceptional resolution. Offering crystal-clear details, it is tailored for applications where image quality is paramount. The high pixel density ensures that intricate details are captured vividly, making it ideal for both professional photography and advanced scientific research where accuracy is essential.

Another hallmark of this image is its dynamic range. IMTL11905.0 employs sophisticated algorithms that enable it to capture a broader spectrum of light intensities. This results in images that maintain rich details in both shadows and highlights, providing a more lifelike representation of the photographed scene. Such capabilities significantly reduce the risk of losing crucial details due to overexposure or underexposure.

In terms of technological prowess, IMTL11905.0 incorporates advanced image processing techniques. With built-in noise reduction algorithms, the image delivers remarkable clarity even in low-light conditions. This is particularly beneficial for night-time photography or in environments where lighting cannot be controlled, allowing users to achieve stunning results without the need for excessive post-editing.

Additionally, IMTL11905.0 is designed with versatility in mind. It is compatible with a variety of devices and platforms, making it a go-to choice for professionals across diverse fields, from medical imaging to artistic photography. Its seamless integration with imaging software enhances user experience and allows for efficient workflow management.

Furthermore, the image is optimized for fast rendering and low storage requirements without compromising quality. This feature is especially useful for applications that require rapid processing, such as video streaming or real-time analysis in scientific studies.

In summary, Image IMTL11905.0 showcases remarkable resolution, superior dynamic range, and advanced processing capabilities that collectively make it a standout choice in contemporary imaging. Its versatility and efficiency further position it as a vital tool for professionals seeking unparalleled image quality and performance.