HOW to USE the Chest Pulse Sensor

HOW TO PUT ON THE CHEST PULSE SENSOR

The chest pulse sensor consists of two components: the chest strap and the sensor unit (see the drawing below). Insert the tab on one end of the chest strap into one end of the sensor unit, as shown in the inset draw- ing. Press the end of the sensor unit under the buckle on the chest strap. The tab should be flush with the front of the sensor unit.

	Chest Strap
Tabs
	Tab
Sensor Unit	Sensor	Buckle
Sensor Unit	Unit	Buckle
	Unit

Next, wrap the chest pulse sen- sor around your chest and attach

the other end of

the chest strap to the sensor unit. Adjust the length

of the chest strap, if necessary. The chest pulse sen-

sor should be under your clothes, tight against your skin, and as high under the pectoral muscles or breasts as is comfortable. Make sure that the logo on the sensor unit is facing forward and is right-side-up.

Pull the sensor unit away from your body a few inches and locate the two electrode areas on the inner side (the electrode areas are covered by shallow ridges). Using saline solution such as saliva or contact lens so- lution, wet both electrode areas. Return the sensor unit to a position against your chest.

CHEST PULSE SENSOR CARE AND MAINTENANCE

•Thoroughly dry the chest pulse sensor after each use. The chest pulse sensor is activated when the electrode areas are wetted and the heart rate monitor is put on; the chest pulse sensor shuts off when it is removed and the electrode areas are

dried. If the chest pulse sensor is not dried after each use, it may remain activated longer than nec- essary, draining the battery prematurely.

•Store the chest pulse sensor in a warm, dry place. Do not store the chest pulse sensor in a plastic bag or other container that may trap moisture.

•Do not expose the chest pulse sensor to direct sunlight for extended periods of time; do not expose it to temperatures above 122° Fahrenheit (50° Celsius) or below 14° Fahrenheit (-10° Celsius).

•Do not excessively bend or stretch the sensor unit when using or storing the chest pulse sensor.

•Clean the sensor unit using a damp cloth—never use alcohol, abrasives, or chemicals. The chest strap may be hand washed and air dried.

CHEST PULSE SENSOR TROUBLESHOOTING

The instructions on the following pages explain how the chest pulse sensor is used with the con- sole. If the chest pulse sensor does not function properly, try the steps below.

•Make sure that you are wearing the chest pulse sen- sor as described at the left. Note: If the chest pulse sensor does not function when positioned as de- scribed, move it slightly lower or higher on your chest.

•Use saline solution such as saliva or contact lens solution to wet the two electrode areas on the sensor unit. If heart rate readings do not appear until you begin perspiring, re-wet the electrode areas.

•As you walk or run on the treadmill, position your- self near the center of the walking belt. For the console to display heart rate readings, the user must be within arm’s length of the console.

•The chest pulse sensor is designed to work with people who have normal heart rhythms. Heart rate reading problems may be caused by medical conditions such as premature ventricular contrac- tions (pvcs), tachycardia bursts, and arrhythmia.

•The operation of the chest pulse sensor can be affected by magnetic interference caused by high power lines or other sources. If it is suspected that this is a problem, try relocating the treadmill.

•The CR2032 battery may need to be replaced (see page 27).

IMTL11905.0 specifications

Image IMTL11905.0 is a state-of-the-art technological advancement in the field of imaging and visual representation. Designed with precision and engineered for excellence, this image exemplifies the perfect amalgamation of innovative features and cutting-edge technologies that define modern imaging solutions.

One of the main features of IMTL11905.0 is its exceptional resolution. Offering crystal-clear details, it is tailored for applications where image quality is paramount. The high pixel density ensures that intricate details are captured vividly, making it ideal for both professional photography and advanced scientific research where accuracy is essential.

Another hallmark of this image is its dynamic range. IMTL11905.0 employs sophisticated algorithms that enable it to capture a broader spectrum of light intensities. This results in images that maintain rich details in both shadows and highlights, providing a more lifelike representation of the photographed scene. Such capabilities significantly reduce the risk of losing crucial details due to overexposure or underexposure.

In terms of technological prowess, IMTL11905.0 incorporates advanced image processing techniques. With built-in noise reduction algorithms, the image delivers remarkable clarity even in low-light conditions. This is particularly beneficial for night-time photography or in environments where lighting cannot be controlled, allowing users to achieve stunning results without the need for excessive post-editing.

Additionally, IMTL11905.0 is designed with versatility in mind. It is compatible with a variety of devices and platforms, making it a go-to choice for professionals across diverse fields, from medical imaging to artistic photography. Its seamless integration with imaging software enhances user experience and allows for efficient workflow management.

Furthermore, the image is optimized for fast rendering and low storage requirements without compromising quality. This feature is especially useful for applications that require rapid processing, such as video streaming or real-time analysis in scientific studies.

In summary, Image IMTL11905.0 showcases remarkable resolution, superior dynamic range, and advanced processing capabilities that collectively make it a standout choice in contemporary imaging. Its versatility and efficiency further position it as a vital tool for professionals seeking unparalleled image quality and performance.