Image IMTL11905.1 user manual Bolts, Be careful to avoid pinching the Upright Wire Harness

Page 7

2.Attach the Latch Housing (89) to the Left Upright (90) with two Latch Bolts (77). Do not overtighten the Latch

Bolts.

3.Have a second person hold the Handrails (114) near the Right and Left Uprights (90, 95). Feed the Upright Wire Harness (108) down into the Right Upright, and pull the end of the Upright Wire Harness out of the lower end of the Upright. Set the Handrail on the Uprights.

Finger tighten eight Upright Bolts (86) and four 3/8” Star Washers (88) into the Uprights (90, 95) and the Handrail (114) as shown. Do not tighten the Upright Bolts yet.

Be careful to avoid pinching the Upright Wire Harness (108).

Note: The CD Holder (122) and the Cup Holder (123) are replaceable. If these parts become dislodged from the Console Base (80), simply press them back in.

4.Connect the Upright Wire Harness (108) to the Base Wire Harness (115) in the bracket on the Base (99).

Make sure to connect the connectors properly (see the inset drawing); the connectors should slide to- gether easily and snap into place. If the connectors do not slide together easily and snap into place, turn one connector and try again to connect them. IF THE CON-

NECTORS ARE NOT CONNECTED PROPERLY, THE CONSOLE MAY BE DAMAGED WHEN THE POWER IS TURNED ON.

Insert the excess Upright Wire Harness (108) and Base Wire Harness (115) up into the Right Upright (95).

	2
	89		90
	89
	77
	3
	122
	86		80
			123
	88
	86
	114
	90	88	86
	114	88	86
	114
			95
			108
	4		95
			99
			108
			115

7

Image 7

Contents Mon.-Fri., 6 a.m.-6 p.m. MST QUESTIONS?Model No. IMTL11905.1 Serial No Call TOLL-FREETable of Contents Treadmill Operation Important PrecautionsPage Right Side Before YOU BeginBack Do not tighten the Upright Bolt yet AssemblyBolts Be careful to avoid pinching the Upright Wire HarnessSmall Screws Cylinder Wire 117 Treadmill Operation HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Features of the Console HOW to USE the Manual Mode HOW to Turn on the PowerCalories display-If Change the incline of the treadmill as desiredFollow your progress with the matrix Displays Matrix-When Distance display- If no goals were set, thisStand on Foot rails Measure your heart rate if desiredHOW to USE a Preset Program Follow your progress with the displays Select one of the custom programs HOW to Create a Custom ProgramHOW to USE a Custom Program Select a heart rate program HOW to USE a Heart Rate ProgramEnter your age and a maximum speed setting Put on the optional chest pulse sensorFollow your progress with the displays HOW to Connect Your Portable Stereo HOW to Connect Your Computer HOW to Connect Your Home StereoAudio Adapter Cable HOW to Connect Your VCRPressVCR. the Play button on your CD player or Measure your heart rate if desired Follow your progress with the matrix Displays HOW to USE a Program Directly from OUR WEB SiteFollow the on-line instructions to start Program Return to the treadmill and stand on the footHOW to Adjust the Cushioning System Information MODE/DEMO ModeOptional Chest Pulse Sensor HOW to Fold the Treadmill for Storage HOW to Fold and Move the TreadmillHOW to Move the Treadmill HOW to Lower the Treadmill for USE Problem The power turns off during use TroubleshootingTop Problem The walking belt slows when walked on Exercise Frequency Exercise GuidelinesExercise Intensity Workout GuidelinesKey Qty Description R1105AExploded DRAWING-Model No. IMTL11905.1 117 Limited Warranty HOW to Order Replacement PartsIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT