JVC FS-X5 manual Specifications

Page 30

English

Specifications

CA-FSX5

 

 

Amplifier

 

 

Output Power

:60 W (30 W + 30 W) at 4 (1 kHz 10% THD)

Main

Sub

:60 W (30 W + 30 W) at 4 (80 Hz 10% THD)

Input Sensitivity/Impedance (1 kHz)

:210 mV/51 k(LEVEL 1)

LINE IN

Output Sensitivity/Impedance (1 kHz)

520 mV/51 k(LEVEL 2)

:600 mV/5.1 k

LINE OUT

OPTICAL DIGITAL OUT

:–23 dBm - –15 dBm

Speaker terminals

:MIN. 4

 

Phones

:16 - 1 k

CD Player

 

 

Signal-To-Noise Ratio

:95 dB

 

Wow And Flutter

:Unmeasurable

Tuner

 

 

FM Tuner

 

 

Tuning Range

:87.5 MHz - 108.0 MHz

AM Tuner

 

 

Tuning Range

:530 kHz - 1 710 kHz

Power Specifications

 

 

Power Requirements

:AC 120 V

, 60 Hz

Power Consumption

:35 W (power on mode)

 

1.2 W (on Standby: with display off)

Center Unit

4.6 W (on Standby: with display on)

 

 

Dimensions

:160 mm 130 mm 242 mm (W/H/D)

Mass

:Approx. 2.3 kg

Speaker Specifications (each unit)

 

 

SP-FSX5

 

 

Type

:2way Bass-reflex type

Main-Speaker

:9.5 cm 1 cm

 

Direct drive

Power Handling Capacity

:30 W

 

Impedance

:4

 

Sub-woofer

:9.0 cm cone

Power Handling Capacity

:30 W

 

Impedance

:4

 

Sound Pressure Level

:77 dB/W·m

Cross over frequency

:210 Hz

 

Frequency Range

:52 Hz

20 000 Hz

Dimensions

:140 mm 301.5 mm 185 mm (W/H/D)

Mass

:Approx. 2.3 kg each

Accessories

FM Wire Antenna (1)

AM Loop Antenna (1)

Remote Control (1)

Batteries (2)

Speaker Cords (4)

Design and specifications are subject to change without notice.

26

Image 30
Contents FS-X5 Mises en garde, précautions et indications diverses For U.S.ADisconnect the main plug to shut the power off completely For Canada/pour le CanadaFront view Face Table of Contents Features IntroductionHow This Manual Is Organized Using the Remote Control AccessoriesHow To Put Batteries In the Remote Control Getting StartedConnecting the FM Antenna Using the Supplied Wire AntennaUsing the Coaxial Type Connector Not Supplied Connecting the AM Antenna Connecting the Speakers SP-FSX5 Connecting an External Equipment Connecting an MD Recorder, etc Optical Digital OutputAutomatic Power On Turning the Power On and Off Basic OperationsChanging the Source Adjusting the Volume Adjusting the Brightness Dimmer at Power OnPower Saving Mode Dimmer at Power Off Fade-out Muting Fade MutingAuto Power Off A.P.off No signal conditionTo disable the A.P.off function Entering the Number with the Remote Control Numeric KeysSelect a station using one of the follow- ing methods Using the TunerTuning In a Station One Touch RadioTo change the preset stations, repeat the same Presetting StationsTo Change the FM Reception Mode Beat Cut AM ReceptionTo Insert a CD Using the CD PlayerWhen playing a CD-R or CD-RW ControlBasics of Using the CD Player Normal Play To Unload a CDProgramming the Playing Order of the Tracks Program Play Random Play Press the CD 6button on the Remote ControlTo Modify the Program Repeat to program the other tracksUnlocking the CD door Repeating TracksLocking the CD door Turn off the systemChanging the Equipment’s Name Using External EquipmentsListening to External Equipment To exit the source LINE, select other source e.g. CDAdjusting the Input Level Recording the System’s Source to External EquipmentPress the CLOCK/TIMER button Using the TimersSetting the Clock Press the 3 or 2 button to set the hourShowing the Clock Display Setting the Daily TimerPerform steps 2 to 5 in Setting the Clo- ck on Correcting the ClockSetting the on time Example AM Setting the OFF time Example PMSelecting the music source Press the Cancel button Turning the Daily Timer On and OffSetting the volume level Select the Fade functionDuring playback a source, press the Sleep button Setting the Sleep TimerTimer Priority Wait for a few secondsPossible Cause TroubleshootingSymptom ActionCare And Maintenance Specifications Caractéristiques