JVC HR-A47U Adjusting tracking condition, Automatic operations after, Activate manual tracking

Page 17

EN 17

D Adjusting tracking condition

—Tracking Adjustments

Automatic tracking adjustment

This VCR automatically adjusts the tracking condition. Whenever you insert a tape and start playback, automatic tracking starts working and continuously analyzes the signal to enable optimum picture quality during playback.

Manual tracking adjustment

If automatic tracking cannot eliminate noises well during playback, use the manual tracking following the procedures below.

You can also use the manual tracking during slow motion playback ( pg. 23).

1 Activate manual tracking

Press CH 5 and ° on the front panel at the same time during playback.

2 Eliminate the noises on the TV screen.

Press CH 5 and ° (or CH + and – on the Remote). Press it briefly for a fine adjustment, or press and hold for coarse adjustment. Watch the screen and continue adjustment until optimum picture and sound quality are achieved.

3 Reactivate automatic tracking

Press CH 5 and ° on the front panel at the same time. The automatic tracking becomes active again. “AUTO PICTURE” will momentarily flash on the TV.

E Automatic operations after

rewinding — Next Function Memory

The Next Function Memory “tells” the VCR what to do after rewinding is complete.

Ensure that the VCR is in stop mode.

a– For Automatic Playback Start

Press REW ( 1 ), then press PLAY ( 3 ) within 2 seconds.

b– For Automatic Power Off

Press REW ( 1 ), then press POWER within 2 seconds.

c– For Automatic Timer Standby

Press REW ( 1 ), then press TIMER within 2 seconds.

NOTE:

It is not possible to select the Automatic Timer Standby function if the cassette’s record safety tab is removed.

Image 17

Contents HR-A47U Telephone Number Dear CustomerPower Lines Power SourcesPower Cord Protection Grounding or PolarizationDamage Requiring Service AccessoriesCleaning Replacement PartsContents Basic Connections Audio OUT not supplied AC Power CordAntenna or cable Coaxial cableSituate VCR Check contentsConnect VCR to TV Final preparation for usePerform Plug & Play setup Plug & Play SettingWhat to do if Plug & Play setting failed Auto Clock Set/Auto Tuner SetAccess Main Menu screen Language SettingAccess Initial Set screen Select language10 EN Clock SettingPreparations Select clock setSelect D.S.T. mode Setting clock semiautomaticallySet Auto Clock to on Select host channel12 EN Setting clock manuallyManual Clock Set To make corrections any time during the processSetting channels Tuner SettingAccess Tuner Set screen Perform Auto Channel SetAccess Manual Channel Set screen Setting channels manually14 EN Add or skip desired channelsStart playback Basic PlaybackLoad a cassette 16 EN Basic Playback FeaturesChanging display information Checking tape positionAutomatic operations after Adjusting tracking conditionActivate manual tracking Eliminate the noises on the TV screenAccess distant code Locating beginning of timer18 EN Locating beginningSelect recording channel Basic RecordingSet tape speed Start recording20 EN Basic Recording FeaturesSpecifying recording length Watching one program while recording anotherExit on-screen display Showing on-screen displayDisplay VCR status on TV screen Locating particular scene Special Effect Playback22 EN Skipping unwanted portions Viewing still pictureViewing slow motion picture Pause during playback24 EN Express Timer ProgramingTo timer-record daily Monday-Friday or weekly serials Engage timer recording standby modeTo use the VCR while it is in timer recording standby mode Press SP/EP to set the tape speed26 EN Checking program settingsOverlapping programs blink on the screen Confirm overlapping programsSelect program to modify 28 EN Change settingSelect Function On the Remote Press OK or Shuttle PlusAuto Picture Auto TimerPicture Control Superimpose30 EN Auto SP = EP TimerVideo Stabilizer Blue BackConnection Edit To Or From Another32 EN TroubleshootingTimer Recording 34 EN Questions and answersCan the VCR indefinitely remain in still mode? What happens if the tape reaches its end during recording?List of terms Specifications Still Picture Playback 23 SuperimposeFront display panel 36 ENFront panel + - - + - - + - - E Rear panelOn-screen display 38 EN How to use the RemoteVCR/TV You can operate JVCs TVAA battery x Provided accessories RF cable F-typeClock reference Quartz Program capacity ProgramsNew Maple Avenue Pine Brook, NJ 40 EN376-9100 954 650 Consumer Video Limited Warranty42 EN Page HR-A47U