JVC HR-A47U manual Check contents, Situate VCR, Connect VCR to TV, Final preparation for use

Page 7

EN 7

1 Check contents

Make sure the package contains all of the accessories listed in “SPECIFICATIONS” ( pg. 39).

2 Situate VCR

Place the VCR on a stable, horizontal surface.

3 Connect VCR to TV

The following connections are required.

RF Connection

1Disconnect the TV antenna from the TV.

2Connect the TV antenna cable to the ANT. IN

terminal on the rear of the VCR.

3Connect the supplied RF cable between the RF OUT terminal on the rear of the VCR and the TV’s antenna input terminal.

AV Connection (improves picture quality during

tape playback.)

If your TV is equipped with audio/video input connectors

1Connect the antenna, VCR and TV as shown in

the illustration.

2Connect an audio/video cable between the AUDIO/VIDEO OUT connectors on the rear of the VCR and the audio/video input connectors on the TV.

4 Connect VCR to power source Connect the AC power plug to an AC outlet.

The clock and tuner channels will automatically be set when the antenna is connected and when the AC power cord is first connected to an AC power outlet ( pg. 8).

(If “Auto” or “CH” is displayed on the front display panel before the VCR is turned on, the clock and tuner channels are being set automatically. Wait until the clock time is displayed on the front display panel before turning on the VCR.)

5Final preparation for use

Turn on the VCR and set the CH3-CH4 switch on the rear (shown below) to either CH3 or CH4 correctly.

The CH3–CH4 switch is preset to the CH3 position.

Set to CH4 if CH3 is used for broadcasting in your area. (To view the picture from this VCR through this channel, select the same channel on the TV with the CH3–CH4 switch setting on the VCR.) You can now perform basic playback ( pg.

15) or basic recording ( pg. 19).

	ANT. IN
	OUT
	AUDIO
	RF OUT
CH3	VIDEO
CH3	CH4
CH3	CH4

Back of VCR

NOTES:

The VCR channel is the channel on which you can watch the picture from the VCR on the TV when only using the RF connection. The VCR’s CH3-CH4 switch, on the back of the VCR, sets the VCR channel to CH3 or CH4.

Even if you are using audio/video cables to connect your VCR to your TV, you must also connect it using the RF cable. This will ensure that you can record one show while watching another ( pg. 20).

For full identification of the VCR’s rear panel, refer to the

Index (

pg. 37).

Image 7

Contents HR-A47U Telephone Number Dear CustomerGrounding or Polarization Power SourcesPower Lines Power Cord ProtectionReplacement Parts AccessoriesDamage Requiring Service CleaningContents Coaxial cable Audio OUT not supplied AC Power CordBasic Connections Antenna or cableFinal preparation for use Check contentsSituate VCR Connect VCR to TVAuto Clock Set/Auto Tuner Set Plug & Play SettingPerform Plug & Play setup What to do if Plug & Play setting failedSelect language Language SettingAccess Main Menu screen Access Initial Set screenSelect clock set Clock Setting10 EN PreparationsSelect host channel Setting clock semiautomaticallySelect D.S.T. mode Set Auto Clock to onTo make corrections any time during the process Setting clock manually12 EN Manual Clock SetPerform Auto Channel Set Tuner SettingSetting channels Access Tuner Set screenAdd or skip desired channels Setting channels manuallyAccess Manual Channel Set screen 14 ENLoad a cassette Basic PlaybackStart playback Checking tape position Basic Playback Features16 EN Changing display informationEliminate the noises on the TV screen Adjusting tracking conditionAutomatic operations after Activate manual trackingLocating beginning Locating beginning of timerAccess distant code 18 ENStart recording Basic RecordingSelect recording channel Set tape speedWatching one program while recording another Basic Recording Features20 EN Specifying recording lengthDisplay VCR status on TV screen Showing on-screen displayExit on-screen display 22 EN Special Effect PlaybackLocating particular scene Pause during playback Viewing still pictureSkipping unwanted portions Viewing slow motion picture24 EN Express Timer ProgramingPress SP/EP to set the tape speed Engage timer recording standby modeTo timer-record daily Monday-Friday or weekly serials To use the VCR while it is in timer recording standby mode26 EN Checking program settingsSelect program to modify Confirm overlapping programsOverlapping programs blink on the screen On the Remote Press OK or Shuttle Plus Change setting28 EN Select FunctionSuperimpose Auto TimerAuto Picture Picture ControlBlue Back Auto SP = EP Timer30 EN Video StabilizerConnection Edit To Or From Another32 EN TroubleshootingTimer Recording What happens if the tape reaches its end during recording? Questions and answers34 EN Can the VCR indefinitely remain in still mode?List of terms Specifications Still Picture Playback 23 SuperimposeFront panel 36 ENFront display panel On-screen display Rear panel+ - - + - - + - - E You can operate JVCs TV How to use the Remote38 EN VCR/TVPrograms Provided accessories RF cable F-typeAA battery x Clock reference Quartz Program capacity376-9100 954 650 40 ENNew Maple Avenue Pine Brook, NJ Consumer Video Limited Warranty42 EN Page HR-A47U