JVC HR-A47U manual Engage timer recording standby mode, Press SP/EP to set the tape speed

Page 25

EN 25

7 Set tape speed

Press SP/EP to set the tape speed.

8Return to normal screen

Press PROG. or OK.

“PROGRAM COMPLETED” appears on the screen for about 5 seconds, then normal screen appears.

•If “PROGRAM NOT COMPLETED PROGRAM OVERLAP” appears, you have another program overlapping the program you have just made.

The Program Check screen appears and conflicting programs will start blinking.

You can now correct the conflicting programs. See “When programs overlap each other” on page 27.

9Engage timer recording standby mode

Press TIMER.

The VCR turns off automatically and “ä” is displayed on the front panel display.

To timer-record daily (Monday–Friday) or weekly serials

Press DAILY (M–F)(number “8”) or WEEKLY (number “9”) anytime during steps 3 through 9.

“DAILY” or “WEEKLY” appears on the Program screen. Pressing the button again makes the corresponding indication disappear.

To use the VCR while it is in timer recording standby mode

Press TIMER to cancel the timer recording standby mode, then press POWER to turn on the VCR.

DO NOT forget to put the VCR into timer recording standby mode again by pressing TIMER after you use the VCR; otherwise, you cannot record the broadcast you want.

When “AUTO TIMER” ( pg. 29) is set to “ON”, the timer recording standby mode is automatically engaged when the VCR is turned off. It is temporarily canceled when the VCR is turned on. You do not have to press TIMER to engage or disengage the timer recording standby mode.

NOTES:

Even if a power failure occurs, the VCR keeps your timer programs. However, the clock time, channel settings, and other menu settings are lost.

As a result, when the power is supplied again to this VCR after the power failure, the following will take place.

1.This VCR starts the Plug & Play setting automatically to restore the clock time and channel setting.

2.If the clock time and channel setting are restored correctly, each timer program you have made will start as its start time unless its end time has elapsed.

Programs that start after midnight must have the next day’s date.

After timer recording is completed, the VCR turns off automatically.

You can program the timer recording while a regular recording is in progress; the menu screens will not be recorded.

If the tape reaches its end during timer recording, the cassette is automatically ejected.

To timer-record cable channels, be sure to keep the cable box turned on with the correct channel selected with the correct chanel selected.

Page 24 Page 26
Image 25
Page 24 Page 26
Contents HR-A47U Telephone Number Dear CustomerPower Lines Power SourcesPower Cord Protection Grounding or PolarizationDamage Requiring Service AccessoriesCleaning Replacement PartsContents Basic Connections Audio OUT not supplied AC Power CordAntenna or cable Coaxial cableSituate VCR Check contentsConnect VCR to TV Final preparation for usePerform Plug & Play setup Plug & Play SettingWhat to do if Plug & Play setting failed Auto Clock Set/Auto Tuner SetAccess Main Menu screen Language SettingAccess Initial Set screen Select language10 EN Clock SettingPreparations Select clock setSelect D.S.T. mode Setting clock semiautomaticallySet Auto Clock to on Select host channel12 EN Setting clock manuallyManual Clock Set To make corrections any time during the processSetting channels Tuner SettingAccess Tuner Set screen Perform Auto Channel SetAccess Manual Channel Set screen Setting channels manually14 EN Add or skip desired channelsLoad a cassette Basic PlaybackStart playback 16 EN Basic Playback FeaturesChanging display information Checking tape positionAutomatic operations after Adjusting tracking conditionActivate manual tracking Eliminate the noises on the TV screenAccess distant code Locating beginning of timer18 EN Locating beginningSelect recording channel Basic RecordingSet tape speed Start recording20 EN Basic Recording FeaturesSpecifying recording length Watching one program while recording anotherDisplay VCR status on TV screen Showing on-screen displayExit on-screen display 22 EN Special Effect PlaybackLocating particular scene Skipping unwanted portions Viewing still pictureViewing slow motion picture Pause during playback24 EN Express Timer ProgramingTo timer-record daily Monday-Friday or weekly serials Engage timer recording standby modeTo use the VCR while it is in timer recording standby mode Press SP/EP to set the tape speed26 EN Checking program settingsSelect program to modify Confirm overlapping programsOverlapping programs blink on the screen 28 EN Change settingSelect Function On the Remote Press OK or Shuttle PlusAuto Picture Auto TimerPicture Control Superimpose30 EN Auto SP = EP TimerVideo Stabilizer Blue BackConnection Edit To Or From Another32 EN TroubleshootingTimer Recording 34 EN Questions and answersCan the VCR indefinitely remain in still mode? What happens if the tape reaches its end during recording?List of terms Specifications Still Picture Playback 23 SuperimposeFront panel 36 ENFront display panel On-screen display Rear panel+ - - + - - + - - E 38 EN How to use the RemoteVCR/TV You can operate JVCs TVAA battery x Provided accessories RF cable F-typeClock reference Quartz Program capacity Programs376-9100 954 650 40 ENNew Maple Avenue Pine Brook, NJ Consumer Video Limited Warranty42 EN Page HR-A47U
Top Page Image Contents