JVC HR-A47U manual 26 EN, Checking program settings

Page 26

26 EN

TIMER RECORDING (cont.)

Turn on the VCR and the TV, and select the VCR channel 3 or 4 (or AV mode) on the TV.

		A –1
1	2	3
		2
4	5	6
7	8	9
B –2	0	4 A –1B –4
C –3		B –2C –3
		B –2C –3
1
A –2, 3		B –2C –3
B –3		B –2C –3
B –3

C –3

C –2

C –2

Other Useful functions for timer recording

You can also use the following functions for timer recording.

Auto Timer ( pg. 29)

When “AUTO TIMER” is set to “ON”, the timer recording standby mode is automatically engaged when the VCR is turned off. It is temporarily canceled when the VCR is turned on. You do not have to press TIMER to engage or disengage the timer recording standby mode.

Auto SP = EP Timer ( pg. 30)

If there is not enough tape to record the entire broadcast for recording in SP mode, the VCR automatically switches to EP mode to allow complete recording. This feature is especially handy when recording a broadcast of more than 2 hours in length.

A Checking program settings

1 Disengage timer

Press TIMER, then press POWER.

When “AUTO TIMER” (	pg. 29) is set to “ON”,
you do not have to press TIMER.
2 Access Program Check screen
Press PROG. CHECK.	PR START		STOP	CH	DATE
	1	8:00P	10:00	12	12/24
	2	10:00A	10:45	40	12/25
	3	11:30P	1:00	125	12/25
	4
	5

6

7

8

PRESS (CHECK) TO NEXT

3 Access Program screen

Press PROG. CHECK again to check more detailed information. Each time you press PROG. CHECK, the next program’s Program screen appears. When all Program screens are shown, normal screen resumes.

B Cancelingsettings or changing program

1 Access Program screen Repeat steps 1 to 3 above.

2 Cancel or change program setting

To cancel a program, press CANCEL when the Program screen you do not want is shown.

To change a program, press the appropriate button: START+/–, STOP+/–, DATE+/–, CH+/–, and/or SP/ EP when the Program screen on which you want to make changes is shown.

3 Return to normal screen

Press PROG. CHECK as many times as necessary until no Program screen is shown.

4 Reengage timer recording standby mode

Press TIMER.

When “AUTO TIMER” ( pg. 29) is set to “ON”, the timer recording standby mode automatically resumes when you turn off the VCR.

Image 26

Contents HR-A47U Dear Customer Telephone NumberPower Cord Protection Power SourcesPower Lines Grounding or PolarizationCleaning AccessoriesDamage Requiring Service Replacement PartsContents Antenna or cable Audio OUT not supplied AC Power CordBasic Connections Coaxial cableConnect VCR to TV Check contentsSituate VCR Final preparation for useWhat to do if Plug & Play setting failed Plug & Play SettingPerform Plug & Play setup Auto Clock Set/Auto Tuner SetAccess Initial Set screen Language SettingAccess Main Menu screen Select languagePreparations Clock Setting10 EN Select clock setSet Auto Clock to on Setting clock semiautomaticallySelect D.S.T. mode Select host channelManual Clock Set Setting clock manually12 EN To make corrections any time during the processAccess Tuner Set screen Tuner SettingSetting channels Perform Auto Channel Set14 EN Setting channels manuallyAccess Manual Channel Set screen Add or skip desired channelsStart playback Basic PlaybackLoad a cassette Changing display information Basic Playback Features16 EN Checking tape positionActivate manual tracking Adjusting tracking conditionAutomatic operations after Eliminate the noises on the TV screen18 EN Locating beginning of timerAccess distant code Locating beginningSet tape speed Basic RecordingSelect recording channel Start recordingSpecifying recording length Basic Recording Features20 EN Watching one program while recording anotherExit on-screen display Showing on-screen displayDisplay VCR status on TV screen Locating particular scene Special Effect Playback22 EN Viewing slow motion picture Viewing still pictureSkipping unwanted portions Pause during playbackExpress Timer Programing 24 ENTo use the VCR while it is in timer recording standby mode Engage timer recording standby modeTo timer-record daily Monday-Friday or weekly serials Press SP/EP to set the tape speedChecking program settings 26 ENOverlapping programs blink on the screen Confirm overlapping programsSelect program to modify Select Function Change setting28 EN On the Remote Press OK or Shuttle PlusPicture Control Auto TimerAuto Picture SuperimposeVideo Stabilizer Auto SP = EP Timer30 EN Blue BackEdit To Or From Another ConnectionTroubleshooting 32 ENTimer Recording Can the VCR indefinitely remain in still mode? Questions and answers34 EN What happens if the tape reaches its end during recording?Specifications Still Picture Playback 23 Superimpose List of termsFront display panel 36 ENFront panel + - - + - - + - - E Rear panelOn-screen display VCR/TV How to use the Remote38 EN You can operate JVCs TVClock reference Quartz Program capacity Provided accessories RF cable F-typeAA battery x ProgramsNew Maple Avenue Pine Brook, NJ 40 EN376-9100 954 650 Limited Warranty Consumer Video42 EN Page HR-A47U