JVC HR-A47U manual 34 EN, Questions and answers, Can the VCR indefinitely remain in still mode?

Page 34

34 EN

TROUBLESHOOTING

Questions and answers

PLAYBACK

Q. What happens if the tape reaches its end during playback or search?

A. The VCR automatically rewinds it to the beginning.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Q.Can the VCR indefinitely remain in still mode?

A.No. It stops automatically after 5 minutes to protect

the heads.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Q.During picture search, still picture playback and frame-by-frame playback, the picture is intermittent. What’s the cause?

A.Picture loss occurs when these types of playback are attempted with a tape recorded in LP mode. Pressing PLAY ( 3 ) to return to normal playback will restore

the picture.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Q. When returning from variable-speed picture search to normal playback, the picture is disturbed. Should I be concerned about this?

A. No, it is normal.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Q. When playing back programs that have been timer- recorded consecutively (such one program from 8:00 to 9:00 and another one from 9:00 to 10:00), the picture and sound become momentarily distorted where the first program ends and the second program begins. Is this a malfunction?

A. No. This is normal.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Q. Other than preventing further recording, what effect does removing the safety tab have?

A. It disables marking of index codes.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Q. Sometimes, during index search, the VCR cannot find the program I want to see. Why not?

A. There may be index codes too close together.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Q.During playback, on-screen display sometimes jitters. Why does this happen?

A.If the condition of the tape being played back is not good, jittering of the video (including on-screen display) may occur.

RECORDING

Q.When I pause and then resume a recording, the end of the recording before the pause is overlapped by the new recording. Why does this happen?

A.This is normal. It reduces distortion at the pause and

resume points.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Q.Can the VCR indefinitely remain in the recording pause mode?

A.No. The VCR automatically stops after 5 minutes to protect the heads. When paused during Instant Timer Recording (ITR), the VCR shuts off automatically after

5 minutes.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Q.What happens if the tape reaches its end during recording?

A.The VCR automatically rewinds it to the beginning.

TIMER RECORDING

Q.REC and ä remain lit on the front display panel. Is there a problem?

A.No. This is a normal condition for a timer recording

in progress.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Q.Can I program the timer while I’m watching a tape or a TV broadcast?

A.Yes, but while you are setting the timer you will not see the tape’s or broadcast program’s picture as it is replaced by the on-screen menu. (The sound from the tape or broadcast program will be heard during the timer setting.)

MOISTURE CONDENSATION

Moisture in the air will condense on the VCR when you move it from a cold place to a warm place, or under extremely humid conditions—just as water droplets form on the surface of a glass filled with cold liquid. Moisture condensation on the head drum will cause damage to the tape. In conditions where condensation may occur, keep the VCR turned on for a few hours to evaporate the moisture before inserting a tape.

ABOUT HEAD CLEANING

Accumulation of dirt and other particles on the video heads may cause the playback picture to become blurred or interrupted. Be sure to contact your nearest JVC dealer if such troubles occur.

ATTENTION

This VCR contains microcomputers. External electronic noise or interference can cause microcomputer to malfunction. If the VCR does not operate correctly switch its power off and unplug the AC power cord from the AC supply. Wait for a while and then plug the power back in. Eject and check the condition of the cassette. If everything appears normal, you can operate the VCR as usual.

Image 34
Contents HR-A47U Dear Customer Telephone NumberPower Cord Protection Power SourcesPower Lines Grounding or PolarizationCleaning AccessoriesDamage Requiring Service Replacement PartsContents Antenna or cable Audio OUT not supplied AC Power CordBasic Connections Coaxial cableConnect VCR to TV Check contentsSituate VCR Final preparation for useWhat to do if Plug & Play setting failed Plug & Play SettingPerform Plug & Play setup Auto Clock Set/Auto Tuner SetAccess Initial Set screen Language SettingAccess Main Menu screen Select languagePreparations Clock Setting10 EN Select clock setSet Auto Clock to on Setting clock semiautomaticallySelect D.S.T. mode Select host channelManual Clock Set Setting clock manually12 EN To make corrections any time during the processAccess Tuner Set screen Tuner SettingSetting channels Perform Auto Channel Set14 EN Setting channels manuallyAccess Manual Channel Set screen Add or skip desired channelsLoad a cassette Basic PlaybackStart playback Changing display information Basic Playback Features16 EN Checking tape positionActivate manual tracking Adjusting tracking conditionAutomatic operations after Eliminate the noises on the TV screen18 EN Locating beginning of timerAccess distant code Locating beginningSet tape speed Basic RecordingSelect recording channel Start recordingSpecifying recording length Basic Recording Features20 EN Watching one program while recording anotherDisplay VCR status on TV screen Showing on-screen displayExit on-screen display 22 EN Special Effect PlaybackLocating particular scene Viewing slow motion picture Viewing still pictureSkipping unwanted portions Pause during playbackExpress Timer Programing 24 ENTo use the VCR while it is in timer recording standby mode Engage timer recording standby modeTo timer-record daily Monday-Friday or weekly serials Press SP/EP to set the tape speedChecking program settings 26 ENSelect program to modify Confirm overlapping programsOverlapping programs blink on the screen Select Function Change setting28 EN On the Remote Press OK or Shuttle PlusPicture Control Auto TimerAuto Picture SuperimposeVideo Stabilizer Auto SP = EP Timer30 EN Blue BackEdit To Or From Another ConnectionTroubleshooting 32 ENTimer Recording Can the VCR indefinitely remain in still mode? Questions and answers34 EN What happens if the tape reaches its end during recording?Specifications Still Picture Playback 23 Superimpose List of termsFront panel 36 ENFront display panel On-screen display Rear panel+ - - + - - + - - E VCR/TV How to use the Remote38 EN You can operate JVCs TVClock reference Quartz Program capacity Provided accessories RF cable F-typeAA battery x Programs376-9100 954 650 40 ENNew Maple Avenue Pine Brook, NJ Limited Warranty Consumer Video42 EN Page HR-A47U