HOW TO CREATE A LEARN WORKOUT
1.Insert the key into the console.
See HOW TO TURN ON THE POWER on page 14.
2.Select the workout menu.
To select the workout menu, press the Classic Workouts Enter/Exit button. The workout menu will then appear in the display.
3.Select a learn workout.
To select one of the two learn workouts, first press the left and right Navigation buttons to highlight the LEARN WORKOUTS option, and then press the Select button.
Then, press the left and right or the up and down Navigation buttons until the name of the desired learn workout appears in the display. Note: To re- turn to a previous menu, press the Back button. To return to the manual mode, press the Classic Workouts Enter/Exit button.
When you select a learn workout, the display will show the name of the workout, the workout time, the maximum incline, and the maximum speed setting. In addition, a profile of the speed settings of the workout will appear in the display.
4.Press the Start button to start the workout, and program the desired settings.
Each learn workout can have up to 40
To program a speed setting for the first segment, press the Speed + and – buttons or one of the numbered speed buttons. To program an incline setting for each segment, press the Incline in- crease or decrease buttons, or one of the six num- bered percent grade buttons.
At the end of the first segment, the program will store the current speed setting and the current in- cline level in memory. Program a speed setting and incline level for the second segment as de- scribed above.
Continue exercising and programming speed and incline settings for up to forty minutes. Press the Stop button twice and then press the Classic Workouts Enter/Exit button when you are finished with your workout. The workout you created will then be stored in memory.
5.When you are finished exercising, remove the key from the console.
See step 9 on page 17.
19