NordicTrack NTL06907.0 HOW to Fold and Move the Treadmill, HOW to Fold the Treadmill for Storage

Page 24

HOW TO FOLD AND MOVE THE TREADMILL

HOW TO FOLD THE TREADMILL FOR STORAGE

Before folding the treadmill, adjust the incline to the lowest position. If you do not do this, you may damage the treadmill when you fold it. Remove the key and unplug the power cord. CAUTION: You must be able to safely lift 45 lbs. (20 kg) to raise, lower, or move the treadmill.

1.Hold the metal frame firmly in the location shown by the arrow at the right. CAUTION: To decrease the pos- sibility of injury, do not lift the frame by the plastic foot rails. Make sure to bend your legs and keep your back straight as you raise the frame. Raise the frame about halfway to the vertical position.

2.Raise the frame until the latch knob locks into the storage position. Make sure that the latch knob is locked in the storage position.

To protect the floor or carpet from damage, place a mat under the treadmill. Keep the treadmill out of di- rect sunlight. Do not leave the treadmill in the stor- age position in temperatures above 85° F (30° C).

HOW TO MOVE THE TREADMILL

Before moving the treadmill, convert the treadmill to the stor- age position as described above. Make sure that the latch knob is locked in the storage position.

1.Hold a handrail and the frame and place one foot against one of the wheels.

2.Tilt the treadmill back until it rolls freely on the wheels. Carefully move the treadmill to the desired location. Never move the treadmill without tipping it back. To reduce the risk of injury, use extreme caution while moving the treadmill. Do not attempt to move the treadmill over an uneven surface.

3.Place one foot against a wheel, and carefully lower the treadmill until it is resting in the storage position.

Frame

Latch Knob

Frame

Handrail

Wheels Base

24

Image 24
Contents QUESTIONS? Model No. NTL06907.0 Serial NoCall TOLL-FREE Table of Contents Important Precautions Page Before YOU Begin For your benefit, read this manual carefully beforeBack Right Side Assembly Make sure that the power cord is unpluggedBe included Do not fully fold the Frame yetCareful not to pinch the Upright Wire Fully tighten the Bolts yetRounded Sole MAY be Damaged When Power is Turned on Not Connected PROPERLY, the CONRaise the Frame 56 to the position shown Small Operation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Console Diagram Features of the ConsoleHOW to Turn on the Power HOW to Personalize Console SettingsSelect the user mode Select a default user setting HOW to Identify Yourself AS User 1 or UserSet the date and time HOW to USE the Manual Mode HOW to USE a Preset Workout or a Weight Loss Workout Press the Start button to start the workout HOW to Create a Learn Workout HOW to USE a Learn Workout Change the workout if desired HOW to View the Fitness Journal HOW to Reset the Fitness Journal Select the user mode. See on Reset the fitness journalExit the user mode Information ModeHOW to Fold and Move the Treadmill HOW to Fold the Treadmill for StorageHOW to Move the Treadmill HOW to Lower the Treadmill for USE Troubleshooting Problem The power turns off during useProblem The walking belt slows when walked on Page Exercise Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencyR1007A Key No. Qty DescriptionDescription Qty Exploded Drawing A-Model No. NTL06907.0 Exploded Drawing B-Model No. NTL06907.0 Exploded Drawing C-Model No. NTL06907.0 Exploded Drawing D-Model No. NTL06907.0 Ordering Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT