Assembly

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed.

Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included hex key and your own phillips screwdriver ,

standard screwdriver , and wire cutters . For help identifying the assembly hard- ware, see the hardware drawings below. To avoid damaging plastic parts, do not use power tools for as- sembly.

Screw (7)–2 1” Tek Screw (82)–4

Cage Nut (70)–3

Star Washer (67)–4

Base Plate Bolt (77)–3		Handrail Bolt (72)–4

1.With the help of a second person, tip the Upright (20) down as shown.

Insert the three Cage Nuts (70) into the three in- dicated holes in the treadmill. To insert each Cage Nut, first hook one side of the Cage Nut into a hole. Then use a standard screwdriver to press the other side of the Cage Nut into the hole, as shown