NordicTrack NTL22840 user manual HOW to Connect Your Home Stereo, HOW to Connect Your Computer

HOW TO CONNECT YOUR HOME STEREO

Note: If your stereo has an unused LINE OUT jack, see instruction A below. If the LINE OUT jack is being used, see instruction B.

A. Plug one end of the audio cable into the jack on the front of the treadmill near the power cord. Plug the other end of the cable into the included adapter.

Plug the adapter into the LINE OUT jack on your stereo.

HOW TO CONNECT YOUR COMPUTER

Note: If your computer has a 3.5mm LINE OUT jack, see instruction A. If your computer has only a PHONES jack, see instruction B.

A. Plug one end of the audio cable into the jack on the front of the treadmill near the power cord. Plug the other end of the cable into the LINE OUT jack on your computer.

A	A
CD	LINE OUT
VCR
Amp LINE OUT	Audio
LINE OUT
	Cable

Audio	Adapter
Cable

			B. Plug one end of the audio cable into the jack on the
			front of the treadmill near the power cord. Plug the
			other end of the cable into a 3.5mm Y-adapter
B. Plug one end of the audio cable into the jack on the			(available at electronics stores). Plug the Y-adapter
			into the PHONES jack on your computer. Plug your
front of the treadmill near the power cord. Plug the
			headphones or speakers into the other side of the
other end of the cable into the included adapter.
			Y-adapter.
Plug the adapter into an RCA Y-adapter (available
at electronics stores). Next, remove the wire that is
currently plugged into the LINE OUT jack on your			B
stereo and plug the wire into the unused side of the
Y-adapter. Plug the Y-adapter into the LINE OUT
jack on your stereo.				PHONES
B	CD		Audio
				3.5mm
	VCR		Cable	Y-adapter
	Amp	LINE OUT
			Headphones/Speakers
	RCA
Audio	Y-adapter
Cable	Adapter
Wire removed from
LINE OUT jack

21