NordicTrack NTL15909.3 warranty Unplug the Power CORD. If the walking belt

Page 24

PROBLEM: The walking belt is off-center or slips when walked on
SOLUTION: a. If the walking belt is off-center, remove the key and	a
UNPLUG THE POWER CORD. If the walking belt	a
has shifted to the left, use the hex key to turn the
left idler roller bolt clockwise 1/2 of a turn; if the walk-
ing belt has shifted to the right, turn the bolt coun-
terclockwise 1/2 of a turn. Be careful not to over-
tighten the walking belt. Plug in the power cord, insert
the key, and run the incline trainer for a few minutes.
Repeat until the walking belt is centered.
b. If the walking belt slips when walked on, first remove	b
the key and UNPLUG THE POWER CORD. Using	b
the hex key, turn both idler roller bolts clockwise, 1/4
of a turn. When the walking belt is correctly tightened,
you should be able to lift each edge of the walking
belt 3 to 4 in. (8 to 10 cm) off the walking platform. Be
careful to keep the walking belt centered. Then, plug
in the power cord, insert the key, and carefully walk
on the incline trainer for a few minutes. Repeat until
the walking belt is properly tightened.
PROBLEM: The console display has lines running through it
SOLUTION: a. If lines appear in the console display, see THE INFORMATION MODE on page 20 and adjust the
contrast level of the display.

25

Image 24

Contents QUESTIONS? Serial NoTable of Contents Important Precautions Handrails while using the incline trainerUse of this product Before beginning this or any exercise proIncline trainer is intended for in-home use Before YOU Begin Serial NumberDecal Assembly Make sure that the power cord is unplugged See the lower inset drawing. Tie the wire tieUpright Wire 78. See the upper inset draw Tighten each of them. Be careful not to pinch Upright WireScrews for step Page 102 Ties Hole Wires Console Wire Ties Page Operation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Console Diagram Features of the Console HOW to USE the Manual Mode Change the incline of the incline trainer as desired Monitor your progress with the displayMeasure your heart rate if desired Turn on the fan if desiredHOW to USE a Calorie Workout Start the workoutHOW to USE a Random Workout Information Mode MetricHOW to USE the Stereo Sound System HOW to USE the Ifit Training ModeHOW to Move the Incline Trainer Troubleshooting Problem The power turns off during useNot compatible with GFCI-equipped outlets Problem The walking belt slows when walked on TopUnplug the Power CORD. If the walking belt Key and Unplug the Power CORD. UsingProblem The console display has lines running through it Ing belt has shifted to the right, turn the bolt counExercise Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencyPart LIST-Model No. NTL15909.3 Key No. Qty DescriptionQty R0910A Exploded Drawing B-Model No. NTL15909.3 Exploded Drawing C-Model No. NTL15909.3 Exploded Drawing D-Model No. NTL15909.3 Ordering Replacement Parts Limited Warranty Icon Health & Fitness, Inc., 1500 S W., Logan, UTPart No R0910A