NordicTrack NTL17950 user manual HOW to Move the Treadmill

Page 9

If you purchase the optional chest pulse sensor (see page 26), follow the steps below to install the re- ceiver included with the chest pulse sensor.

1.Make sure that the power cord is unplugged.

2.Remove the indicated 3/4” Screw (95) and the Access Door (121) from the bottom of the Console Base (98).

3.Connect the wire on the receiver (A) to the indicated wire extending from the Console Base (98). Hold the re- ceiver so the small cylinder is oriented as shown and is facing the Console Base. Attach the receiver to the plastic posts on the Access Door (121) with the two in- cluded small screws.

4.Make sure that no wires are pinched. Reattach the Access Door (121) with the 3/4” Screw (95). Discard the other wires included with the receiver.

 

Small

98

Screws

 

Small

Wire

Cylinder

 

121

A

 

 

95

HOW TO MOVE THE TREADMILL

1.Unplug the power cord.

2.Hold the treadmill with your hands in the location shown by the arrow at the right, and raise the end of the tread- mill. CAUTION: To decrease the possibility of injury, bend your legs and keep your back straight. As you raise the treadmill, make sure to lift with your legs rather than your back.

3.Push the treadmill to the desired location. To reduce the risk of injury, use extreme caution while moving the treadmill.

4.Carefully lower the treadmill until it is resting on the floor.

Wheels

9

Image 9
Contents QUESTIONS? Model No. NTL17950 Serial NoCustomer HOT Line Table of Contents Important Precautions Page Before YOU Begin Assembly Wire Harness 108 is not pinched. Press the Long Panel flush with the top of the Upright. Route the WireFirmly tighten the four Console Bolts This stepPage HOW to Move the Treadmill Operation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Features of the Console HOW to USE the Manual Mode HOW to Turn on the PowerFollow your progress with the display Adjust the cushioning system as desiredMeasure your heart rate if desired Turn on the fans if desiredWhenkey. you are finished exercising, remove Select one of the preset programs HOW to USE a Preset ProgramAdjust the intensity level of the program if Desired Identify yourself as user A, B, C, or DAdjust the cushioning system as desired HOW to Create a Custom Program HOW to USE a Custom Program Enter a maximum target heart rate setting HOW to USE a Heart Rate ProgramPut on the optional chest pulse sensor Follow your progress with the displays HOW to Connect Your MP3 Player or CD Player HOW to Connect Your Portable StereoAudio Cable HOW to Connect Your Computer HOW to Connect Your Home StereoPress the Play button on your MP3 player, CD Player, or VCR HOW to Connect Your VCRFollow your progress with the display Directly from OUR WEB Site Follow the on-line instructions to start ProgramReturn to the treadmill and stand on the foot Optional Chest Pulse Sensor Information MODE/DEMO ModeTroubleshooting Problem The power turns off during useTop Problem The walking belt slows when walked on Exercise Intensity Conditioning GuidelinesWorkout Guidelines Exercise FrequencyQty Description R1204AOrdering Replacement Parts Exploded DRAWING-Model No. NTL17950 101 114 110 Limited Warranty