Before the personal television can be used, you must connect an antenna, a 75 ohm CATV cable, or a VCR to the 75 ohm antenna terminal on the treadmill frame. Note: No antenna, cable, or adapter is included.
HOW TO CONNECT AN ANTENNA | 300 Ohm Flat Wire |
Indoor Antenna
1.Place a VHF antenna in the desired loca- tion. Connect the 300 ohm flat wire from the antenna to a 300 ohm to 75 ohm adapter.
Screwdriver |
VHF 300 |
Ohm Flat |
Wire |
300 to 75 Ohm Adapter |
1.See the drawing near the bottom of this page. Connect the 300 ohm flat wire from the antenna to a 300 ohm to 75 ohm adapter.
2.Push the 300 ohm to 75 ohm adapter onto the 75 ohm antenna terminal on the treadmill frame near the power cord.
75 Ohm CATV Cable
1.See the drawing near the bottom of this page. Connect the 75 ohm CATV cable from the antenna to the 75 ohm antenna terminal on the treadmill frame near the power cord.
2. Push the 300 |
ohm to 75 ohm |
VHF
HOW TO CONNECT A 75 OHM CATV CABLE
adapter onto |
the 75 ohm an- |
tenna terminal |
on the treadmill |
frame near the |
power cord. |
Antenna
300 to 75 Ohm
Adapter
75Ohm Terminal
1.Connect a 75 ohm CATV cable to the 75 ohm antenna terminal on the treadmill frame near the power cord.
75 Ohm CATV Cable
75 Ohm Terminal
Outdoor Antenna
HOW TO CONNECT A VCR
1. Connect one end of a 75 ohm CATV cable to the |
video output jack on your VCR. |
Note: Outdoor antennas are subject to weathering that can reduce signal quality. Inspect your antenna and the
Combination |
|
VHF/UHF Antennas |
|
300 Ohm |
|
Flat Wire |
|
75 Ohm | 75 Ohm |
Terminal | CATV Cable |
300 to 75 |
|
Ohm Adapter |
|
75 Ohm CATV Cable | |
2. | Plug in the power cord of your VCR. See your VCR |
| user’s manual for proper grounding instructions. |
3. | Connect the 75 ohm CATV cable to the 75 ohm an- |
| tenna terminal on the treadmill frame near the power |
| cord. |
Note: To operate the television with your VCR, make sure that channel 3 or 4 is selected.
11