Ironman Fitness 220t owner manual Console Harness Location

Page 6

Assembly

Assembly requires the included allen wrench and phillips screwdriver.

Do not plug in the power cord until all assembly steps are completed.

1. With the treadmill deck in the down

 

position, leave the unit on the original

 

packing material to assemble all parts.

 

2. Connect the console harness together.

 

One side of harness is located near the

 

motor cover on the bottom left side. The

 

other end is located inside the Left

 

Upright assembly. See Figure 1 and 2.

CONSOLE

 

HARNESS

3. Pull the wiring harness from top of

 

upright tube making sure harness connec-

 

tors are pulled into large hole at bottom

Figure 1: Console Harness Location

of upright.

 

Caution:

 

Make sure harness is installed inside the upright and pay attention not to pinch the wire harness.

Figure 2: Console Harness Connection

6

Image 6
Contents Ironman 220t Treadmill Table of Contents Important Safety Information Safety Precautions and TipsBefore You Start Assembly Main ComponentsConsole Harness Location IMPORTANT, Please Note Left and Right Bottom Handle Cover Installation Left and Right Fender Installation Warm Up Exercises Exercise GuidelinesMoving Instructions Power Requirements Console Panel Functions Time WindowQuick Start / Manual Mode Program and OperationEnter Program UP / Down Power Program Profiles Speed Incline 11INCLINEBelt Adjustment Change MPH to KMH Maintenance Instructions To Apply Lubricant to the Walking BoardTroubleshooting Guide Treadmill will not startError Messages Treadmill Error MessagesCalibration Sequence Parts List Ironman 220t Parts List Rev EREF# Description QTY Exploded View Console Assembly Wire Harness Warranty Information Ironman Fitness 220t Limited WarrantyCustomer Service