Assembly
6.Position the Left and Right Bottom Handle Covers to underside of handle assembly, then connect the EKG Harness Wires to the Left and Right Bottom Handle Pulse Plates as shown in Figure 5.
Tighten into place using Phillip Screw ST4.2X16 (Qty. 6).
Next, install the End Caps to the handle assem- bly.
IMPORTANT, PLEASE NOTE:
Tighten all hardware installed in Step 1 through Step 5.
CONSOLE |
EKG HARNESS |
RIGHT BOTTOM |
HANDLE COVER |
PHILIP SCREW ST4.2x16 |
END CAP |
LEFT BOTTOM |
HANDLE COVER |
Figure 5: Left and Right Bottom Handle Cover
Installation
7.Fold the treadmill into the storage position and lock into place as shown in Figure 6.
Figure 6: Storage Position Locking Method
8