ASSEMBLY STEP 1
HARDWARE BAG 1 CONTENTS :
BOLT (A) | SPRING WASHER (B) | FLAT WASHER (C) |
20 mm | 15 mm | 15 mm |
Qty: 4 | Qty: 4 | Qty: 4 |
RUNNING DECK |
LEFT |
CONSOLE |
MAST |
FOOT LATCH |
BASE FRAME |
FLAT WASHERS (C) |
SPRING WASHERS (B) |
BOLTS (A) |
ACut the yellow banding straps and lift the running deck upward until the foot latch locks. Remove all contents from underneath the running deck.
BOpen hardware bag 1.
CWith the running deck in the raised position, attach the left console mast to the base frame using 4 bolts (a), 4 spring washers (b) and 4 flat washers (c).
Note: Do not completely tighten any screws or bolts until step 4 is complete!
6