ASSEMBLY STEP 3
HARDWARE BAG 3 CONTENTS :
BOLT (D) | FLAT WASHER (E) |
25 mm | 16 mm |
Qty: 2 | Qty: 2 |
| CONSOLE CABLES | |
ASSEMBLE | CONSOLE | |
FLAT WASHER (E) | ||
LEFT SIDE | ||
BOLT (D) | ||
FIRST | ||
| CONSOLE MAST |
ADisengage the deck lock latch with your foot to lower the running deck.
BOpen hardware bag 3.
CGently place the console on top of the console masts. Attach the left side first using 1 bolt (d) and 1 flat washer (e).
DConnect the console cables, carefully tucking wires in masts to avoid damage.
EAttach the right side of the console using 1 bolt (d) and 1 flat washer (e).
Note: Do not completely tighten any screws or bolts until step 4 is complete!
Note: Be careful not to pinch any wires while assembling the masts.
8