ASSEMBLY STEP 3
HARDWARE BAG 3 CONTENTS :
BOLT (A) | SPRING WASHER (B) | ARC WASHER (C) |
20 mm | 8.2 mm | 8.2 mm |
Qty: 4 | Qty: 4 | Qty: 4 |
ARC WASHERS (C) |
|
SPRING WASHERS (B) | CONSOLE |
BOLTS (A) | CONSOLE MAST BOOT |
CONSOLE MAST | CONSOLE CABLES |
|
8
AOpen hardware bag 3.
BSlide console through the console mast boots.
Note: Make sure the arrows on the mast rings are pointing upward towards the console when sliding into place.
CConnect console cables.
Note: Be careful not to pinch any wires while assembling the right console mast.
DConnect console to right console mast using 2 bolts (a), 2 spring washers (b) and 2 arc washers (c).
ERepeat on other side.