HOW TO USE FAT BURN, AEROBIC, AND PERFORMANCE PROGRAMS
The ten fat burn, aerobic, and performance programs automatically control the speed and incline of the tread- mill as they guide you through effective workouts de- signed to help you achieve specific exercise goals.
matrix.) The speed settings for the next eighteen peri- ods will be shown in the eighteen columns to the right.
CURRENT PERIOD |
Follow the steps below to use a fat burn, aerobic, or performance program.
1 Insert the key fully into the console.
See HOW TO TURN ON THE POWER on page 12.
2 Select user 1, 2, or 3.
See step 2 on page 13.
3 Enter your weight if desired.
If you have not entered your weight, see HOW TO ENTER USER INFORMATION on page 12.
4 Select the desired program.
When the key is inserted, the manual mode will be selected. To select a fat burn, aerobic, or perfor- mance program, press the MODE button
repeatedly until one of the fat burn, aerobic, or performance indicators lights. The LED matrix will show the first eighteen speed settings of the program you have selected. The SPEED/PACE display will flash the program’s maximum speed setting and the INCLINE display will flash the pro- gram’s maximum incline setting for ten seconds.
Press the START button or the SPEED + button
5 to start the program.
A moment after the button is pressed, the treadmill will automatically adjust to the first speed and in- cline settings for the program. Hold the handrails and begin walking.
Each program is divided into several time periods of different lengths. One speed setting and one in- cline setting are programmed for each period. The speed setting for the first period is shown in the flashing CURRENT PERIOD column of the LED matrix. (The incline settings are not shown in the
15
When only three seconds remain in the first period of the program, both the CURRENT PERIOD col- umn and the column to the right will flash, a series of tones will sound, and all speed settings will move one column to the left. The speed setting for the second period will then be shown in the flash- ing CURRENT PERIOD column and the treadmill will automatically adjust to the speed and incline settings for the second period.
The program will continue in this way until the speed setting for the last period is shown in the CURRENT PERIOD column and the TIME display counts down to zero. The walking belt will then slow to a stop.
Note: Each time a period ends and the speed set- tings move to the left, if all of the indicators in the CURRENT PERIOD column are lit, the speed set- tings may move downward so that only the highest indicators in the columns will appear in the LED matrix. When the speed settings move to the left again and not all of the indicators in the CURRENT PERIOD column are lit, the speed settings will move back up.
If the speed or incline setting for the current period is too high or too low, you can manually override the setting by pressing the SPEED or INCLINE buttons. Every few times one of the SPEED buttons is pressed, an additional indicator will light or darken in the CURRENT PERIOD col- umn. If any of the columns to the right of the CURRENT PERIOD column have the same num- ber of lit indicators as the CURRENT PERIOD col- umn, an additional indicator may light or darken in those columns as well. Note: If you manually ad- just the speed setting so that all of the indicators in the CURRENT PERIOD column are lit, the speed settings in the LED matrix will not move downward as described above. Note: If you manually over- ride the speed or incline setting for the current period, when the period ends the treadmill will automatically adjust to the speed and incline settings for the next period.