Your Touch Control Mnel
The touch control panel allows you to set the oven controls electronically with the touch of a finger. It’s designed to be easy to use and understand. With your microwave oven, you have the option of using your automatic cooking control pads for quick and easy convenience cooking. Or you may make your own programs to suit your individualized cooking style.
When You Plug in the Oven
The display panel displays five 8’s, 18 POWER and all of the oven functions. After 15 seconds, all lights disappear and “RESET” appears in the upper portion. Touch the CLEAR/OFF pad, set the CLOCK and oven is ready for use.
If power is disrupted at any time, the above sequence recurs and you must reset CLOCK after touching CLEAR/OFF.
“Error” Appears on Display:
. When using Temp Cook/Hold, you have entered a temperature less than 90°F. or more than 199°F.
●When using Auto Defrost, the food weight you entered did not correspond with the code number entered.
“Probe” Appears on Display:
c Probe has been forgotten when Auto Roast or Temp Cook/Hold is being used.
●Probe is not securely seated in oven wall receptacle.
1.Display Panel. Displays time of day, time or temperature during cooking functions, power level being used, cooking mode and instructions.
2.Time Cook I and Time Cook II. Microwave for a preset amount of time using automatic power level 10 or change power level after setting time. (See page 8.)
3.Auto Stirt. Allows you to program your oven to begin cooking at a preset time of
4.Clock. Touch this pad to enter time of day or check time of day while microwaving. To set clock, first touch CLOCK pad and then enter time of day. For example, if time is 1:30, touch number pads 1, 3, and O and “1:30” will appear on display. “START” will flash on display, directing you to touch START, thus setting the clock. If you wish to reset or change time, simply repeat above process.
5.Number Pads. Touch these pads to enter cook time, food temperature, power level, Auto Roast codes or Auto Defrost codes and food weight.
6.Clear/Off. When touched, it stops the oven and erases all settings except time” of da;.
7.Auto Roast. Insert probe, touch this pad, and desired number pad for code to
8.Exhaust Fan. Press HI, LO or OFF for desired fan speed.
9.Time Defrost. Gentle thawing at automatic power level 3, or change power level after entering time. (See page 9.)
10.Temp Cook/Hold. Use the temperature probe to cook by using a preset temperature. When internal food temperature reaches 90°F., oven shows temperature until preset temperature is reached and holds temperature for up to one hour. (See page 10.)
11.Min/Sec Timer. This feature uses no microwave energy while it functions as both a kitchen timer or as a holding period between defrost and time or temperature cooking. (See page 11.)
U. Power hvel. Touch this pad before entering another power level number if you want to change from automatic power level 10 (High) for cooking or power level 3 (Low) for defrosting.
H. Stirt. Touch this pad to begin any function.
14.Auto Defrost. Touch this pad, then code number and food weight. The oven automatically sets power levels and defrosting time. (See page 14.)
15.Light. Touch desired pad to illuminate counter or to turn on night light.
AU~MATIC FAN FEATUW
Cooking appliances installed under the oven might, under some heavy usage conditions, cause temperatures high enough to overheat some internal parts of the microwave oven.
To prevent overheating from taking place, the exhaust fan is designed to automatically turn on at low speed if excessive temperatures occur. Should this happen, the fan cannot be manually turned off, but it will automatically turn off when the internal parts have cooled. The fan may stay on up to approximately 30 minutes after the range and microwave oven controls have been turned off.
6
