Reebok RT 8.0 Unplug the Power CORD. If the walking belt, Key and Unplug the Power CORD. Using

Page 23

PROBLEM: The walking belt is off-center or slips when walked on

 

 

 

 

SOLUTION: a. If the walking belt is off-center, remove the key and

 

 

 

 

UNPLUG THE POWER CORD. If the walking belt

 

a

 

has shifted to the left, use the hex key to turn the

 

 

 

 

 

 

 

 

left idler roller bolt clockwise 1/2 of a turn; if the

 

 

 

 

walking belt has shifted to the right, turn the left

 

 

 

 

idler roller bolt counterclockwise 1/2 of a turn. Be

 

 

 

 

careful not to overtighten the walking belt. Plug in the

 

 

 

 

power cord, insert the key, and run the treadmill for a

 

 

 

 

few minutes. Repeat until the walking belt is cen-

 

 

 

 

 

 

 

 

tered.

 

 

 

 

b. If the walking belt slips when walked on, first remove

 

 

 

 

the key and UNPLUG THE POWER CORD. Using

 

b

 

the hex key, turn both idler roller bolts clockwise, 1/4

 

 

 

 

of a turn. When the walking belt is correctly tight-

 

 

 

 

ened, you should be able to lift each edge of the

 

 

 

 

walking belt 3 to 4 in. (8 to 10 cm) off the walking

 

 

 

 

platform. Be careful to keep the walking belt cen-

 

 

 

 

tered. Then, plug in the power cord, insert the key,

 

 

 

 

and carefully walk on the treadmill for a few minutes.

 

 

 

 

 

 

 

 

Repeat until the walking belt is properly tightened.

 

 

 

 

PROBLEM: The incline of the treadmill does not change correctly

SOLUTION: a. Hold down the Stop button and the Speed increase button, insert the key into the console, and then release the Stop button and the Speed increase button. Press the Stop button and then press the Incline increase or decrease button. The treadmill will automatically rise to the maxi- mum incline level and then return to the minimum level. This will recalibrate the incline system. If the incline system does not calibrate, press the Stop button again, and then press the Incline in- crease or decrease button again. When the incline system is calibrated, remove the key from the console.

PROBLEM: The console display has lines running through it

SOLUTION: a. If lines appear in the console display, see THE INFORMATION MODE on page 18 and adjust the contrast level of the display.

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Model No. RBTL89010.0 Serial No QUESTIONS? DecalTable of Contents Important Precautions Page BEFORE YOU BEGIN Tipping, or falling AssemblyMake sure that the power cord is unplugged To pinch the Upright Wire Page Attach the Left Upright Sleeve not shown to Console assembly in the same wayRaise the Frame 67 to the position shown PRE-LUBRICATED Walking Belt Operation AND ADJUSTMENTHOW to Plug in the Power Cord Console Diagram Features of the Console HOW to USE THE MANUAL MODE HOW to Turn on the PowerMeasure your heart rate if desired. Before using Start the workout HOW to USE a Performance WorkoutSelect a performance workout Select a my memory workout HOW to Create a MY MEMORY WorkoutStart the walking belt HOW to USE a MY MEMORY WorkoutHOW to Create a MY MEMORY Workout on HOW TO USE THE IFIT TRAINING MODE Information ModeHOW to USE the Stereo Sound System HOW to Lower the Treadmill for USE HOW to Fold and Move the TreadmillHOW to Fold the Treadmill HOW to Move the TreadmillCompatible with GFCI-equipped outlets TroubleshootingProblem The power turns off during use Top Problem The walking belt slows when walked onWalking belt has shifted to the right, turn the left Unplug the Power CORD. If the walking beltKey and Unplug the Power CORD. Using Problem The console display has lines running through itExercise Frequency Exercise GuidelinesExercise Intensity Workout GuidelinesQty Description Part List -Model No. RBTL89010.0Description Key No. Qty Exploded Drawing a -Model No. RBTL89010.0 R0512A Exploded Drawing B -Model No. RBTL89010.0 R0512A Exploded Drawing C -Model No. RBTL89010.0 R0512A Exploded Drawing D -Model No. RBTL89010.0 R0512A Exploded Drawing E-Model No. RBTL89010.0 R0512A Icon Health & Fitness, Inc., 1500 S W., Logan, UT Ordering Replacement PartsLimited Warranty
Top Page Image Contents