Reebok RT 8.0 manual Assembly, Make sure that the power cord is unplugged, Tipping, or falling

Page 6

ASSEMBLY

To hire an authorized service technician to assemble the treadmill, call 1-800-445-2480. Assembly re- quires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, some lubricant may be transferred to the top of the walking belt or the shipping carton. This is normal and does not affect performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included hex keys and your own Phillips screwdriver

and adjustable

wrench

.

 

Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number after the parentheses is the quantity needed for assembly. Note: Some small parts may have been preassembled. To avoid damaging parts, do not use power tools for assembly. Extra hardware may be included.

3/8" Jam Nut (7)–2

3/8" Star Washer

#8 x 3/4"

3/8" x 1 1/4"

(6)–10

Tek Screw (24)–4

Patch Bolt (2)–6

3/8" x 1 3/4" Bolt (3)–1

3/8" x 2" Bolt (4)–1

 

3/8" x 3 3/4" Patch Bolt (5)–4

 

1. Make sure that the power cord is unplugged.

1

 

With the help of a second person, raise the front

 

 

of the treadmill and insert the crossbar on the

 

 

Base (103) into the cutout in the cardboard

 

 

stand as shown. Have the second person hold

 

 

the treadmill to prevent it from moving for-

 

 

ward or backward until assembly step 3.

 

 

WARNING: Serious injury

 

 

may occur if the treadmill moves for-

 

 

ward or backward and falls off the card-

 

 

board stand. A second person must

 

 

hold the treadmill until assembly step 3

103

 

to prevent the treadmill from moving,

Cardboard

tipping, or falling.

 

 

 

Stand

 

6

 

Page 5 Page 7
Image 6
Page 5 Page 7
Contents QUESTIONS? Decal Model No. RBTL89010.0 Serial NoTable of Contents Important Precautions Page BEFORE YOU BEGIN Assembly Make sure that the power cord is unpluggedTipping, or falling To pinch the Upright Wire Page Console assembly in the same way Attach the Left Upright Sleeve not shown toRaise the Frame 67 to the position shown Operation AND ADJUSTMENT HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Console Diagram Features of the Console HOW to Turn on the Power HOW to USE THE MANUAL MODEMeasure your heart rate if desired. Before using HOW to USE a Performance Workout Select a performance workoutStart the workout HOW to Create a MY MEMORY Workout Select a my memory workoutHOW to USE a MY MEMORY Workout HOW to Create a MY MEMORY Workout onStart the walking belt Information Mode HOW TO USE THE IFIT TRAINING MODEHOW to USE the Stereo Sound System HOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Fold the Treadmill HOW to Lower the Treadmill for USETroubleshooting Problem The power turns off during useCompatible with GFCI-equipped outlets Problem The walking belt slows when walked on TopProblem The console display has lines running through it Unplug the Power CORD. If the walking beltKey and Unplug the Power CORD. Using Walking belt has shifted to the right, turn the leftWorkout Guidelines Exercise GuidelinesExercise Intensity Exercise FrequencyPart List -Model No. RBTL89010.0 Qty DescriptionDescription Key No. Qty Exploded Drawing a -Model No. RBTL89010.0 R0512A Exploded Drawing B -Model No. RBTL89010.0 R0512A Exploded Drawing C -Model No. RBTL89010.0 R0512A Exploded Drawing D -Model No. RBTL89010.0 R0512A Exploded Drawing E-Model No. RBTL89010.0 R0512A Ordering Replacement Parts Limited WarrantyIcon Health & Fitness, Inc., 1500 S W., Logan, UT
Top Page Image Contents