Reebok Fitness RBTL09507.0 manual See steps 4 and 6. Tighten the 3/8 x 4 1/2, Bolts

Page 10

10. Attach the console assembly with six 5/16" x 1	10
1/4" Bolts (7) and six 5/16" Star Washers (10)	10
1/4" Bolts (7) and six 5/16" Star Washers (10)
(only one side is shown).	Console
	Console
See steps 4 and 6. Tighten the 3/8" x 4 1/2"	Assembly
See steps 4 and 6. Tighten the 3/8" x 4 1/2"
Bolts (6).
			10
			7
			10
	10
	7
11. Identify the Storage Latch (53). Remove the tie	11
from the end of the tube. Make sure that the	11
from the end of the tube. Make sure that the
sleeve has been slid over the indicated hole and
that the Latch Knob (54) is locked into the indi-
cated hole. Pull on the sleeve to make sure		54
that it is locked into place.		54
that it is locked into place.
	Tube		Hole
	Tube
	Sleeve
			53
12. Raise the Frame (56) to the position shown.	12
Have a second person hold the Frame until	12
Have a second person hold the Frame until	56
this step is completed.	56
Orient the Storage Latch (53) so that the large
barrel and the Latch Knob (54) are in the posi-	8	4
tions shown.	8


Attach the Latch Bracket (14) and Storage Latch		53
(53) to the Base (83) with two 3/8" x 2" Bolts (4)
and two 3/8" Nuts (8).	54	Large
		Large
Attach the upper end of the Storage Latch (53)		Barrel
Attach the upper end of the Storage Latch (53)
to the bracket on the Frame (56) with a 3/8" x 2"
Bolt (4) and a 3/8" Nut (8). Note: It may be nec-		14
essary to move the Frame back and forth to		14	83
align the Storage Latch with the bracket.
Lower the Frame (56) (see HOW TO LOWER	8		4
THE TREADMILL FOR USE on page 25).			4
	10

Image 10

Contents Call TOLL-FREE QUESTIONS?Please do not Contact On the WEBTable of Contents Important Precautions Page Before YOU Begin Assembly Hardware may be includedMake sure that the power cord is unplugged Wheel must turn freelyGers do not fully tighten the Bolts yet Be careful not to pinch the Upright WireNot fully fold the Frame yet Not to pinch the wires Tor and try again. if the Connectors areSole MAY be Damaged When Power is Turned on Not Connected PROPERLY, the CONSee steps 4 and 6. Tighten the 3/8 x 4 1/2 BoltsSmall HOW to Plug in the Power Cord Operation and AdjustmentPRE-LUBRICATED Walking Belt Console Diagram Features of the ConsoleSelect the user mode HOW to Turn on the PowerHOW to Personalize Console Settings Insert the key into the consoleHOW to Identify Yourself AS User 1 or User Select a default user settingSet the date and time Select the manual mode HOW to USE the Manual ModePersonalize console settings if desired Start the walking belt and adjust the speedMeasure your heart rate if desired Select a preset classic workout HOW to USE a Classic WorkoutPress the Start button to start the workout HOW to USE AN Event Training Workout Select an event training workoutHOW to Create a Custom Workout Select one of the four custom workoutsHOW to USE a Custom Workout HOW to View the Fitness Journal Exit the user mode HOW to Reset the Fitness JournalSelect the user mode. See on Reset the fitness journal Information ModeHOW to USE the Stereo Sound System Optional Chest Pulse SensorHOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Fold the Treadmill for Storage HOW to Lower the Treadmill for USETroubleshooting Problem The power turns off during useProblem The walking belt slows when walked on Page Workout Guidelines Exercise GuidelinesExercise Intensity Exercise FrequencyR1107A Key No. Qty DescriptionQty Exploded Drawing A-Model No. RBTL09507.0 R1107A Exploded Drawing B-Model No. RBTL09507.0 R1107A Exploded Drawing C-Model No. RBTL09507.0 Exploded Drawing D-Model No. RBTL09507.0 R1107A Limited Warranty Ordering Replacement PartsIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT