Reebok Fitness RBTL09507.0 manual Assembly, Hardware may be included

Page 6

ASSEMBLY

To hire an authorized service technician to assemble the treadmill, call 1-800-445-2480.

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill perfor- mance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included hex keys and your own Phillips screwdriver			,
adjustable wrench	, and needlenose pliers	.

Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number after the parentheses is the quantity needed for assembly. Note: If a part is not in the parts bag, check to see if it is preattached to one of the parts to be assembled. To avoid damaging plastic parts, do not use power tools for assembly. Extra

hardware may be included.

		3/8" Star	5/16" Star	1/4" Star
	3/8" Nut (8)–3	3/8" Star	5/16" Star	Washer (33)–2
		Washer (9)–4	Washer (10)–6	Washer (33)–2
		Washer (9)–4	Washer (10)–6
	Base Pad Spacer
	(13)–2

#8 x 3/4" Screw (1)–4

#8 x 1" Tek Screw (2)–4

1/4" x 1 1/4" Bolt (5)–2

3/8" x 2" Bolt (4)–3

5/16" x 1 1/4" Bolt (7)–6

3/8" x 4 1/2" Bolt (6)–4

6

Image 6

Contents Call TOLL-FREE QUESTIONS?Please do not Contact On the WEBTable of Contents Important Precautions Page Before YOU Begin Assembly Hardware may be includedMake sure that the power cord is unplugged Wheel must turn freelyBe careful not to pinch the Upright Wire Gers do not fully tighten the Bolts yetNot fully fold the Frame yet Not to pinch the wires Tor and try again. if the Connectors areSole MAY be Damaged When Power is Turned on Not Connected PROPERLY, the CONSee steps 4 and 6. Tighten the 3/8 x 4 1/2 BoltsSmall Operation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Console Diagram Features of the ConsoleSelect the user mode HOW to Turn on the PowerHOW to Personalize Console Settings Insert the key into the consoleSelect a default user setting HOW to Identify Yourself AS User 1 or UserSet the date and time Select the manual mode HOW to USE the Manual ModePersonalize console settings if desired Start the walking belt and adjust the speedMeasure your heart rate if desired HOW to USE a Classic Workout Select a preset classic workoutPress the Start button to start the workout HOW to USE AN Event Training Workout Select an event training workoutHOW to Create a Custom Workout Select one of the four custom workoutsHOW to USE a Custom Workout HOW to View the Fitness Journal Exit the user mode HOW to Reset the Fitness JournalSelect the user mode. See on Reset the fitness journal Information ModeHOW to USE the Stereo Sound System Optional Chest Pulse SensorHOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Fold the Treadmill for Storage HOW to Lower the Treadmill for USETroubleshooting Problem The power turns off during useProblem The walking belt slows when walked on Page Workout Guidelines Exercise GuidelinesExercise Intensity Exercise FrequencyR1107A Key No. Qty DescriptionQty Exploded Drawing A-Model No. RBTL09507.0 R1107A Exploded Drawing B-Model No. RBTL09507.0 R1107A Exploded Drawing C-Model No. RBTL09507.0 Exploded Drawing D-Model No. RBTL09507.0 R1107A Ordering Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT