Reebok Fitness RBTL79607.0 manual Assembly, Make sure that the power cord is unplugged

Page 6

ASSEMBLY

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill perfor- mance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included hex key and your own Phillips screwdriver , rubber

mallet , and adjustable wrench .

Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of the manual. The number after the parentheses shows the quantity needed for assembly. Note: If a part is not in the parts bag, check to see if it is preat- tached to one of the parts to be assembled. Extra hardware may be included. To avoid damaging plastic parts, do not use power tools for assembly.

 

#8 x 2 1/4" Screw (7)–4

#8 x 3/4" Screw (6)–6

#8 x 1" Tek Screw

3/8" Star

 

 

 

 

(1)–4

 

 

 

 

 

Washer (8)–8

 

 

 

 

 

 

 

Extension Leg

5/16" x 2" Bolt (2)–4

 

3/8" Nut (11)–2

Nut (10)–4

5/16" Star

 

 

 

 

 

 

 

Washer (9)–4

 

 

 

 

 

3/8" x 2 3/4" Bolt (5)–2

3/8" x 1" Bolt (4)–7

3/8" x 1 3/4" Bolt (3)–1

1. Make sure that the power cord is unplugged.

1

 

 

 

With the help of a second person, carefully tip

85

 

the treadmill onto its left side as shown. Partially

81

 

fold the Frame (55) so that the treadmill is more

 

 

stable. Do not fully fold the Frame until the

 

 

treadmill is completely assembled.

 

 

Attach two Base Pads (81) to the Base (85) with

 

1

 

 

two #8 x 1" Tek Screws (1).

 

 

 

81

1

 

55

 

 

6

 

Image 6
Contents Call TOLL-FREE QUESTIONS?Model No. RBTL79607.0 Serial No Mon.-Fri a.m.-6 p.m. MST Sat a.m.-4 p.m. MSTTable of Contents Important Precautions Page Before YOU Begin Assembly Make sure that the power cord is unpluggedPage Page Tors are not Connected Properly Console MAY be Damaged WhenPull on the sleeve to make sure that it is locked into place Operation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Features of the Console Select the manual mode HOW to Turn on the PowerHOW to USE the Manual Mode Insert the key into the consoleChange the incline of the treadmill as desired Time/PaceNot do this, the treadmill’s electrical compo Nents may wear prematurelyHOW to USE a Classic Workout Select a classic workoutFollow your progress with the matrix and the displays HOW to USE a Weight Loss Workout Enter your weightSelect a weight loss workout HOW to Create a Custom Workout Select one of the custom workoutsHOW to USE a Custom Workout Information Mode HOW to USE the Stereo Sound SystemMake sure that the audio wire is fully plugged HOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Fold the Treadmill for Storage HOW to Lower the Treadmill for USETroubleshooting Problem The power turns off during useProblem The walking belt slows when walked on TopPage Workout Guidelines Exercise GuidelinesExercise Intensity Exercise FrequencyR0907A Qty DescriptionQty Exploded Exploded Drawing B-Model No. RBTL79607.0 R0907A 111 113 Exploded Drawing D-Model No. RBTL79607.0 R0907A Ordering Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT