SETUP PROCEDURES
Caution: Setup of this product should only be performed by qualified service personnel or system installers.
●Opening the Switch Pocket
1.Press the power button to turn off the headset.
2.Open the switch pocket adjacent to the ear pad using
the supplied screwdriver.
SERVICE
USE ONLY
3.Set the switches as described below.
4.After finishing the setup, turn on the headset.
5.Replace the lid.
●Channel Group Selection
You can select a channel group by setting the rotary switch inside the pocket.
Note: When a switch position other than 1 through 8 is selected, the power indicator will blink in red.
1.Press the power button to turn off the headset.
2.Set the switch to the channel group.
Available Channel Group: 1 - 8
| GROUP | 1 2 |
SERVICE | 8 | 3 |
7 | ||
USE ONLY | 6 | 5 4 |
TION
FUNC
OFF 
ON
|
|
|
| 1 | 2 |
|
|
|
| 8 | 3 |
|
|
|
| 4 | |
SERVICE | GROUP | 1 | 2 | 7 | |
USE ONLY |
| 3 | 5 | ||
8 |
| 4 | 6 | ||
| 7 | 6 | 5 |
|
|
| TION |
|
|
|
|
| FUNC |
|
|
|
|
| OFF |
|
|
|
|
| ON |
|
|
|
|
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
OFF
ON
10