Head Band and Head Pad, Battery Lock Eject

qHead Band and Head Pad

Adjustable to your head by sliding the head pad.

wBattery Lock [EJECT]

When removing the battery, slide out the lock.

When loading a new battery, insert the battery until the lock clicks.

eBattery (Optional accessory) See PRECAUTIONS.

rHead Pad Cushion

tStrap (Standard accessory)

ySwitch Pocket

Do not open the lid. Should be opened only by qualified service personnel or system installers.

uEarphone Pad

iMicrophone Boom

Adjust the microphone position to your mouth by rotat- ing and bending the boom.

oMicrophone and Windproof Cushion (Standard accessory)

!0Channel Indicator

Stead red and green light indicates which channel is in operation.

Red: Is lit when channel A is selected.

Green: Is lit when channel B is selected.

Blinks to indicate the Talk or Page mode.

Constant Blink: Talk mode

Random Blink: Page mode

!1Power Button and Indicator [POWER]

Pressing the button for one second will turn the headset on or off.

The indicator shows the status as follows.

Green On: The headset is supplied power and in operation.

Red On: The battery requires recharging.

Red Blink: The channel selector is set to the wrong position.

!2Volume Control Buttons [VOL ▲ ▼]

Pressing the respective buttons will increase or decrease the sound level.

!3Talk Button [T]

This button controls communications with the customer. When the button is released, you can hear any cus- tomer who is at the menu-board.

While the button is held down in the press-to-talk mode, you can speak to the customer.

When the button is pressed in the talk-lock mode, you can speak to the customer until you press the button a second time.

!4Page Button [P]

This button controls communications with store person- nel.

When the button is released, you can hear the commu- nications among store personnel.

While the button is held down in the press-to-talk mode, you can speak to store personnel.

When the button is pressed in the page-lock mode, you can speak to the store personnel until you press a button a second time.

!5A/B Channel Selection Button [A/B]

This button switches the frequencies used from channel A to B and vice versa. The channel indicator will display the currently selected channel in red (A) or green (B).