Bodyguard T700 manual Quick Troubleshooting Check List, Problem Possible CAUSE/SOLUTION

Page 32

Quick Troubleshooting Check List

If you experience a problem during the normal operation of the T700, use the following troubleshooting table below. If you are unfamiliar or uncertain with basic diagnostic maintenance procedures, contact your Authorized Bodyguard® Dealer for diagnostics or repair of your T700.

Table 3

PROBLEM

POSSIBLE CAUSE/SOLUTION

• Computer will not light

• Unit is not plugged in. – Plug unit in.

up when power

• Power cord. – Check that power cord is functional; replace if necessary.

is turned ON.

• Circuit breaker. – Reset the breaker.

 

 

• Damaged motor circuit board. – Contact your Bodyguard® Dealer.

 

• The belt is over tensioned. – Perform Belt Alignment.

 

• The wires are not connected. – Remove the cover and connect the wires properly.

 

 

• Belt doesn’t turn.

• Magnetic key is not in place. – Insert the magnetic key.

 

 

• Elevation does not

• It is not calibrated. – Perform Elevation Calibration.

respond properly.

• The wire is not connected on the motor circuit board. –

 

 

Connect the elevation wire to the circuit board.

 

 

• Motor drive does not

• It is not calibrated. – Perform Motor Check.

respond properly.

• The wire is not connected on the motor circuit board. –

 

 

Motor wiring harness needs to be connected to the lower board.

 

 

• Motor turns backwards.

• The wires are reversed on the circuit drive. –

 

Contact your Bodyguard® Dealer.

• Computer key(s) not

• Keypad may be damaged by liquid penetrating through the seal. –

responding to touch,

Contact your Bodyguard® Dealer.

or sticking.

• Excessive amount of cleaning solution used. –

 

Use mild cleanser on damp cloth only when cleaning console and unit.

 

 

• Squeaking noise from

• Poly V-belt slipping. – Contact your Bodyguard® Dealer.

the motor.

• Motor brush noise excessive. – Contact your Bodyguard® Dealer.

• Belt tracks left

• Uneven floor. – Move the treadmill to an even floor.

and right.

• Rear roller not adjusted for sloped floor. –

 

The rear roller needs to be adjusted. Perform Belt Alignment.

 

 

• Speed is not constant or

• The drive motor is not calibrated. – Perform Motor Check.

seems too fast or slow.

• The tension on the motor drive is too excessive. –

 

Remove tension on the running belt. Perform Belt Alignment.

 

 

• Can’t get out at the end

• Elevation is not calibrated. – Perform Elevation Calibration.

of a program.

 

 

 

• Error log

• See table 4

 

 

32

Page 31 Page 33
Image 32
Page 31 Page 33
Contents T700 Contents Impotant Safety Notice For Your Personal SafetyElectrical Information Know Your Heart RateT700 Limited Warranty Responsibility of the UserOperatiOperating your T700 Getting to Know the T700 Computer Display MonitorKeys Saving an Exercise custom programs Scanning FeaturePausing During an Exercise Access to Settings Menu Language FeatureViewing Exercise Parameters Fitness Networking Cardio Theater, Fit LinxxWarm Up and Cool Down Feature Distance Unit FeatureWeight Unit Feature Heart Rate Control Options Feature Beeper FeatureHeart Rate Access Options Feature Time, Distance, Calories FeatureUser Identification Feature Table of minimum and maximum valuesActivate User Create UserReset Statistics Edit UserView Statistics Delete UserEdit Text Feature Speed LimitsPause Time Big Number OptionMax Duration 16 Add/Remove ProgramLearn Program Saving Option On or OffProgram Levels JustGoTM ProgramInterval Program Manual ProgramCardiovascular Program Random Program Walk Program Hill Climb ProgramSpeed Run Program Track ProgramRunner’s Interval Program Hills and Valleys ProgramGerkin Protocol Program Required wireless chest strap Using Contact Heart RateHeart Rate Access Feature Requires wireless chest strap How to Use Heart Rate AccessChanging Your Target Heart Rate in a Program Possible Chest Strap Heart Rate Problems Troubleshooting Check List TablePossible Contact Heart Rate Problems Access to Diagnostics menuNvram Test Eprom TestKeypad Test Display TestBelt Alignment Motor CheckStatistics Error LogElevation Calibration Speed Sensor Test MaintenanceCurrent Test Maintenance InformationInfor ation General CareLubricant Application Belt and Running Deck Running BeltDeck Surface Quick Troubleshooting Check List Problem Possible CAUSE/SOLUTIONError Codes Problem Cause / SolutionThank You for Purchasing a Bodyguard T700 Safety requirements North America InternationalInterference limits requirements North America CanadaMade in Canada
Top Page Image Contents