A S S E M B LY STEP 2
INTRODUCTION
HARDWARE BAG 2 CONTENTS :
SPRING WASHER (B)
Qty: 8
BOLT (A)
Qty: 8
FLAT WASHER (C)
Qty: 4
ARC WASHER (D)
Qty: 4
BOLT (E)
Qty: 2
IMPORTANT PRECAUTIONS
CONSOLE MAST SUPPORT TUBE |
BOLT(A) |
SPRING WASHER (B) |
ARC WASHER (D) |
CONSOLE WIRE |
CONSOLE MAST |
FLAT WASHER (C) |
BOLT (A) |
A Open HARDWARE BAG 2.
| DECK LOCK LATCH |
LEFT CONSOLE MAST | BOLT (E) |
|
ASSEMBLY
BEFORE YOU BEGIN
TREADMILL OPERATION
CONDITIONING GUIDELINES
Note: On right CONSOLE MAST, the CONSOLE WIRE must be threaded through the mast.
BSlide the right console mast down on to the console mast support tube. Then bolt in place using 2 BOLTS (A), 2 SPRING WASHERS (B), and 2 ARC WASHERS (D) on the front, then use 2 BOLTS (A), 2 SPRING WASHERS (B), and 2 FLAT WASHERS (C) on the side.
CRepeat on the other side.
DAttach DECK LOCK LATCH to LEFT CONSOLE MAST using 2 BOLTS (E).
TROUBLESHOOTING & MAINTENANCE
*Note: Be careful not to pinch any wires while assembling the masts.
LIMITED WARRANTY